INSTRUMENTATION DEVELOPMENT INCLUDING NSTAP
Zhao, R. and Smits, A. J., “Binormal cooling errors in crossed hot-wire measurements.” Experiments in Fluids, Vol. 40 (2), pp. 212-217, 2006.
Kunkel, G. J., Arnold, C. B. and Smits, A. J., “Development of NSTAP: a Nanoscale Thermal Anemometry Probe,” AIAA Paper 2006-3718, 36th AIAA Fluid Dynamics Conference, San Francisco, CA, June 2006.
Li, J., McKeon, B. J., Jiang, W., Morrison, J. F. and Smits, A. J., “The response of hot wires in high Reynolds-number turbulent pipe flow.” Measurement Science and Technology, Vol. 15, pp. 789-798, 2004.
Zhao, R., Li, J. and Smits, A. J., “A new calibration method for crossed hot wires.” Measurement Science and Technology, Vol. 15, pp. 1926-1931, 2004.
McKeon, B. J., Li, J. D., Jiang, W., Morrison, J. F. and Smits, A. J., “Pitot probe corrections in fully-developed turbulent pipe flow.” Measurement Science and Technology, Vol. 14, 1449-1458, 2003.
McKeon, B. J. and Smits, A. J., “Static Pressure Correction in High Reynolds-number Fully-Developed Turbulent Pipe Flows.” Measurement Science and Technology, Vol. 13, #10, pp. 1608-1614, 2002.
Zagarola, M.V., Williams, D.R. and Smits, A.J. “Calibration of the Preston Probe for High Reynolds Number Flows,” Measurement Science and Technology, Vol. 12, pp. 495-501, 2001. (This is a revised and extended version of Paper #103).
Zagarola, M.V., Williams, D.R. and Smits, A.J. “Calibration of the Preston Probe for High Reynolds Number Flows,” AIAA Paper 2000-2394, Fluids 2000 Conference, Denver, Colorado, June 19-22, 2000.
Britcher, C.P., Gonzalez, O., Gray, S., Smits, A.J., Gomeiz, O., Barkely, J.E. and Jafri, A. “Design of a Magnetic Suspension and Balance System for the Princeton/ONR High Reynolds Number Test Facility,” 5th International Symposium on Magnetic Suspension Technology, 2000.
Smits, A.J. and Zagarola, M.V. “Design of a High Reynolds Number Testing Facility Using Compressed Air,” AIAA paper #97-1917, 4th AIAA Shear Flow Conference, Snowmass, CO, June 29-July 2, 1997.
Erbland, P.J., Baumgartner, M.L., Yalin, A., Etz, M.R., Muzas, B., Lempert, W., Miles, R.B. and Smits, A.J., “Development of Planar Diagnostics for Imaging a Mach 8 Flow Fields Using CO2 and Na Seeding,” AIAA paper #97-0154, 35th AIAA Aerospace Sciences Meeting, Reno, Nevada, January 6 - 9, 1997.
Yalin, A.P., Lempert, W., Etz, M.R., Erbland, P.J. Smits, A.J. and Miles, R.B., “Planar Imaging in a Mach 8 Flow Using Sodium Laser-Induced Fluorescence,” AIAA paper #96-2270, 19th AIAA Advanced Measurement and Ground Testing Technology Conference, June 17-20, 1996.
Baumgartner, M.L., Smits, A.J., Nau, T. and Rowley, C.W., “A New Hypersonic Boundary Layer Facility.” AIAA Paper #95-0787, 33rd AIAA Aerospace Sciences Meeting, Reno, Nevada, January 9 - 12, 1995.
Forkey, J., Cogne, S., Smits, A.J., Bogdonoff, S.M., Lempert, W. and Miles, R.B., “Time-Sequenced and Spectrally Filtered Rayleigh Imaging of Shock Wave and Boundary Layer Structure for Inlet Characterization,” AIAA Paper #93-2300, AIAA 29th Propulsion Conference, Monterey, California, June 28-30, 1993.
Smith, D.R., Fernando, E.M., Donovan, J.F. and Smits, A.J., “Conventional Skin Friction Measurement Techniques for Strongly Perturbed Supersonic Turbulent Boundary Layers.” European Journal of Mechanics B, Vol. 11, No.6, pp. 719-740, 1992. (This article is a revised and expanded version of AIAA Paper 89-1861, see Paper #33).
Smits, A.J., “An Introduction to Hot-Wire Anemometry in Flows”, Proc. Symp. on the Heuristics of Thermal Anemometry, ASME Fluids Engineering Div. Spring Meeting, Toronto, Ontario, Canada, 1990. ASME Publication FED-Vol. 97, Ed. D.E. Stock, S.A. Sherif and A.J. Smits.
Miles, R.B., Smits, A.J., Markovitz, E., Connors, J., Roth, G., Howard, P., Smith, M.W., Kumar, V. and Lempert, W., “Instantaneous Velocity Profiles and Density Cross Sections in Supersonic Shear Layers”, Proceedings of the International Workshop on the Physics of Compressible Turbulent Mixing, Princeton, N.J., October 24-27, 1988. Springer-Verlag, 1989.
Miles, R.B., Connors, J., Kumar, V., Markovitz, E., Roth, G., Smith, M.W. and Smits, A.J., “Velocity Profiles and Density Cross Sections in Supersonic Shear Layers by Simultaneous Flow Tagging and Rayleigh Scattering” Conf. on Lasers and Electro-Optics, Baltimore, MD., April 24-28, 1989.
Fernando, E.M., Donovan, J.F., Smith, D.R. and Smits, A.J., “Conventional Skin Friction Measurement Techniques for Strongly Perturbed Supersonic Turbulent Boundary Layers”, AIAA Paper 89-1861, AIAA 20th Fluid Dynamics Conference, Buffalo, New York, June 12-14, 1989.
Fernando, E.M., Donovan, J.F. and Smits, A.J., “The Calibration and Operation of a Constant Temperature Crossed-Wire Probe in Supersonic Flow,” Proc. Symp. on Thermal Anemometry, ASME Fluids Engineering Div. Spring Meeting, Cincinnati, Ohio, June, 1987. ASME Publication FED-Vol. 53, Ed. D.E. Stock.
Smits, A.J. and Muck, K.C., “Constant Temperature Hot-Wire Anemometer Practice in Supersonic Flows. Part II - The Inclined Wire”, Experiments in Fluids, Vol.2, pp.33-41, 1984. This article is a revised and expanded version of AIAA Paper 83-0508 (paper #9).
Smits, A.J., “The Static Response of a Bowed Inclined Hot Wire,” Experiments in Fluids, Vol.2, pp.183-187, 1984.
Smits, A.J., Hayakawa, K. and Muck, K.C., “Constant-Temperature Hot-Wire Anemometer Practice in Supersonic Flows. Part I - The Normal Wire”, Experiments in Fluids, Vol.1, pp.83-92, 1983. This article is a revised and expanded version of AIAA Paper 83-0050 (paper #8).
Smits, A.J. and Muck, K.C., “Constant-Temperature Hot-Wire Anemometer Practice in Supersonic Flows. Part II - The Inclined Wire,” AIAA Paper 83-0508, AIAA 21st Aerospace Sciences Meeting, Reno, Nevada, January 1983.
Smits, A.J., Muck, K.C. and Hayakawa, K., “Constant Temperature Hot-Wire Anemometer Practice in Supersonic Flows. Part I - The Normal Wire,” AIAA Paper 83-0050, AIAA 21st Aerospace Sciences Meeting, Reno, Nevada, January 1983.
Smits, A.J. and Perry, A.E., “A Note on Hot-Wire Anemometer Measurements of Turbulence in the Presence of Temperature Fluctuations”, Journal of Physics E: Scientific Instruments, Vol.14, pp. 311-312, 1981.
Smits, A.J. and Perry, A.E., “The Effect of Varying Resistance Ratio on the Behavior of Constant Temperature Hot Wire Anemometers,” Journal of Physics E: Scientific Instruments, Vol.13, pp.451-456, 1980.
Smits, A.J. and Baskaran, V., “Two-Dimensional Solid Blockage in a Slotted Wall Wind Tunnel,” Proceedings of the Seventh Australasian Hydraulics and Fluid Mechanics Conf., Brisbane, August 1980.
Perry, A.E. Smits, A.J. and Chong, M.S., “The Effect of Certain Low Frequency Phenomena on the Calibration of Hot Wires”, Journal of Fluid Mechanics, Vol.90, pp.415-431, 1979.
Smits, A.J. and Perry, A.E., “Optimization of LDV Geometry,” Applied Optics, Vol.18, pp.1097-1100, 1979.
Haverbeke, A.A.J., Wood, D.H. and Smits, A.J., “Uncertainties and Errors in Conditional Sampling”, Proceedings of the Second International Symposium on Turbulent Shear Flows, Imperial College, London, July 1979, pp.11.1-11.6.
Smits, A.J., Perry, A.E., and Hoffman, P.H., “The Response to Temperature Fluctuations of a Constant-Current Hot-Wire Anemometer”, Journal of Physics E: Scientific Instruments, Vol.11, pp.909-914, 1978.