Burnt-in timecode

related topics
{system, computer, user}
{@card@, make, design}
{build, building, house}

Burnt-in timecode (often abbreviated to BITC by analogy to VITC) is a human-readable on-screen version of the timecode information for a piece of material superimposed on a video image. BITC is sometimes used in conjunction with "real" machine-readable timecode, but more often used in copies of original material on to a non-broadcast format such as VHS, so that the VHS copies can be traced back to their master tape and the original time codes easily located.

Many professional VTRs can "burn" (overlay) the tape timecode onto one of their composite outputs. This output (which usually also displays the setup menu or on-screen display) is known as the super out or monitor out. The character switch or menu item turns this behaviour on or off. The character function is also used to display the timecode on the preview monitors in linear editing suites.

Videotapes that are recorded with timecode numbers overlaid on the video are referred to as window dubs, named after the "window" that displays the burnt-in timecode on-screen.

Timecode can also be superimposed on video using a dedicated overlay device, often called a "window dub inserter". This inputs a video signal and its separate timecode audio signal, reads the timecode, superimposes the timecode display over the video, and outputs the combined display (usually via composite), all in real time. Stand-alone timecode generator / readers often have the window dub function built-in.

Some consumer cameras, in particular DV cameras, can "burn" (overlay) the tape timecode onto the composite output. This output typically is semi-transparent and may include other tape information. It is usually activated by turning on the 'display' info in one of the camera's sub-menus. While not as 'professional' as an overlay as created by a professional VCRs, it is a cheap alternative that is just as accurate.

Timecode is stored in the metadata areas of captured DV AVI files, and some software is able to "burn" (overlay) this into the video frames. For example, DVMP Pro[1] is able to "burn" timecode or other items of DV metadata (such as date and time, iris, shutter speed, gain, white balance mode etc) into DV AVI files.

Some modern editing systems can use OCR techniques to read BITC in situations where other forms of timecode are not available.

BITC can also be referred to as Viz-Code.[citation needed]

See also


Full article ▸

related documents
Data service unit
Atari Transputer Workstation
Frame (telecommunications)
Session Layer
Basic rate interface
Sinclair ZX80
Apple Attachment Unit Interface
Automatic callback
Secure cryptoprocessor
Virtual machine
VESA Display Data Channel
Packet analyzer
Killer application
Broadcast domain
Microsoft Groove
Finger protocol
Motorola 56000
Multiple document interface
Μ-law algorithm
IBM 650
Joint Tactical Information Distribution System
Scalable Coherent Interface
Amiga 1000
Control unit
Hitachi 6309
Manchester Mark I
Arcadia 2001
Single UNIX Specification