Electric power transmission

related topics
{system, computer, user}
{math, energy, light}
{company, market, business}
{ship, engine, design}
{rate, high, increase}
{acid, form, water}
{line, north, south}
{city, large, area}
{island, water, area}
{car, race, vehicle}
{build, building, house}

Electric power transmission or "high voltage electric transmission" is the bulk transfer of electrical energy, from generating power plants to substations located near to population centers. This is distinct from the local wiring between high voltage substations and customers, which is typically referred to as electricity distribution. Transmission lines, when interconnected with each other, become high voltage transmission networks. In the US, these are typically referred to as "power grids" or sometimes simply as "the grid", while in the UK the network is known as the "national grid." North America has three major grids: The Western Interconnection; The Eastern Interconnection and the Electric Reliability Council of Texas (or ERCOT) grid.

Historically, transmission and distribution lines were owned by the same company, but over the last decade or so many countries have introduced market reforms that have led to the separation of the electricity transmission business from the distribution business.[1]

Transmission lines mostly use three phase alternating current (AC), although single phase AC is sometimes used in railway electrification systems. High-voltage direct current (HVDC) technology is used only for very long distances (typically greater than 400 miles, or 600 km); submarine power cables (typically longer than 30 miles, or 50 km); or for connecting two AC networks that are not synchronized.

Electricity is transmitted at high voltages (110 kV or above) to reduce the energy lost in long distance transmission. Power is usually transmitted through overhead power lines. Underground power transmission has a significantly higher cost and greater operational limitations but is sometimes used in urban areas or sensitive locations.

A key limitation in the distribution of electricity is that, with minor exceptions, electrical energy cannot be stored, and therefore it must be generated as it is needed. A sophisticated system of control is therefore required to ensure electric generation very closely matches the demand. If supply and demand are not in balance, generation plants and transmission equipment can shut down which, in the worst cases, can lead to a major regional blackout, such as occurred in California and the US Northwest in 1996 and in the US Northeast in 1965, 1977 and 2003. To reduce the risk of such failures, electric transmission networks are interconnected into regional, national or continental wide networks thereby providing multiple redundant alternate routes for power to flow should (weather or equipment) failures occur. Much analysis is done by transmission companies to determine the maximum reliable capacity of each line which is mostly less than its physical or thermal limit, to ensure spare capacity is available should there be any such failure in another part of the network.

Contents

Full article ▸

related documents
Digital television
Subwoofer
Digital subscriber line
Symbian OS
Home computer
Electrical engineering
Super Nintendo Entertainment System
CP/M
Integrated circuit
History of radio
X.25
I²C
Internet Relay Chat
IBM Personal Computer
Timeline of computing 1950–1979
IBM PC compatible
Analog-to-digital converter
Interlace
Musical Instrument Digital Interface
SCADA
Thin client
Framebuffer
Network address translation
Timeline of computing 1980–1989
Phreaking
Signals intelligence
Universal Mobile Telecommunications System
Booting
Telephone
High-voltage direct current