Hull (watercraft)

related topics
{ship, engine, design}
{@card@, make, design}
{math, number, function}
{rate, high, increase}
{math, energy, light}
{water, park, boat}
{area, part, region}

A hull is the watertight body of a ship or boat. Above the hull is the superstructure and/or deckhouse, where present. The line where the hull meets the water surface is called the waterline.

The structure of the hull varies depending on the vessel type. In a typical modern steel ship, the structure consists of watertight and non-tight decks, major transverse and longitudinal members called watertight (and also sometimes non-tight) bulkheads, intermediate members such as girders, stringers and webs, and minor members called ordinary transverse frames, frames, or longitudinals, depending on the structural arrangement. The uppermost continuous deck may be called the "upper deck," "weather deck," "spar deck," "main deck" or simply "deck." The particular name given depends on the context--the type of ship or boat, the arrangement, or even the area where it sails. Not all hulls are decked (for instance a dinghy).

In a typical wooden sailboat, the hull is constructed of wooden planking, supported by transverse frames (often referred to as ribs) and bulkheads, which are further tied together by longitudinal stringers or ceiling. Often but not always there is a centerline longitudinal member called a keel. In fiberglass or composite hulls, the structure may resemble wooden or steel vessels to some extent, or be of a monocoque arrangement. In many cases, composite hulls are built by sandwiching thin fiber-reinforced skins over a lightweight but reasonably rigid core of foam, balsa wood, impregnated paper honeycomb or other material.

Contents

General features

The shape of the hull is entirely dependent upon the needs of the design. Shapes range from a nearly perfect box in the case of scow barges, to a needle-sharp surface of revolution in the case of a racing multihull sailboat. The shape is chosen to strike a balance between cost, hydrostatic considerations (accommodation, load carrying and stability) and hydrodynamics (speed, power requirements, and motion and behavior in a seaway).

Hull shapes

Full article ▸

related documents
Dual wield
Sail-plan
Scout rifle
Luger P08 pistol
Double-barreled shotgun
Kinetic energy penetrator
Mikoyan-Gurevich MiG-19
Ko-hyoteki class submarine
Outboard motor
Soviet submarine K-19
DSV Alvin
Space Shuttle Enterprise
AIM-54 Phoenix
Supersonic
Sailboat
Self-propelled anti-aircraft weapon
Multiple independently targetable reentry vehicle
Magneto (electrical)
Nuclear bunker buster
Wing
German Type XXI submarine
Survivability
Los Angeles class submarine
UGM-27 Polaris
Tsar Bomba
Biplane
Kamov Ka-50
AGM-114 Hellfire
Flare (pyrotechnic)
ASROC