related topics
{island, water, area}
{build, building, house}
{ship, engine, design}
{acid, form, water}
{rate, high, increase}
{line, north, south}
{language, word, form}
{car, race, vehicle}

A leat (also lete or leet) is the name, common in the south and west of England and in Wales, for an artificial watercourse or aqueduct dug into the ground, especially one supplying water to a watermill or its mill pond. Other common uses for leats include delivery of water for mineral washing and concentration, for irrigation, to serve a dye works or other industrial plant, and provision of drinking water to a farm or household.

According to the Oxford English Dictionary, leat is cognate with let in the sense of "allow to pass through". Other names for the same thing include fleam (probably a leat supplying water to a mill that did not have a millpool). In parts of northern England, for example around Sheffield, the equivalent word is goit. In southern England, a leat used to supply water for water-meadow irrigation is often called a carrier, top carrier, or main.


Design and functions

Leats generally start some distance (a few hundred yards, or perhaps several miles) above the mill or other destination, where an offtake or sluice gate diverts a proportion of the water from a river or stream. A weir often serves to provide a reservoir of water adequate for diversion. The leat then runs along the edge or side of the valley, at a shallower slope than the main stream. The gradient determines the flow rate together with the quality of the wetted surface of the leat. The flow rate may be calculated using the Manning formula. By the time it arrives at the water mill the difference in levels between the leat and the main stream is great enough to provide a useful head of water – several metres (perhaps 5 to 15 feet) for a watermill, or a metre or less (perhaps one to four feet) for a water-meadow.


In mining areas, leats were built to supply water for hushing mineral deposits, washing ore and powering mills. They were used extensively by the Romans, and can still be seen at many sites, such as the Dolaucothi goldmines. They used the aqueducts to prospect for ores by sluicing away the overburden of soil to reveal the bedrock in a method known as hushing. They could then attack the ore veins by fire-setting, quench with water from a tank above the workings, and remove the debris with waves of water, a method still used in hydraulic mining. The water supply could then be used for washing the ore after crushing by simple machines also driven by water.

The Romans also used them for supplying water to the bath-houses or thermae and to drive vertical water-wheels.

Leats were built to work lead, tin and silver ores in Wales, Cornwall, Devon and the Pennines from the 17th century.

Full article ▸

related documents
Dartmouth Dam
Geography of Vanuatu
Avon River (Western Australia)
Geography of The Gambia
Geography of Montserrat
Geography of the Faroe Islands
Fair Isle
Geography of Swaziland
Geography of Tunisia
Geography of Martinique
Geography of Saint Vincent and the Grenadines
Geography of Palau
Arable land
North China Plain
Gulf of Saint Lawrence
Wyperfeld National Park
Geography of Papua New Guinea
Hydraulic fill
Geography of Uganda
Northern Hemisphere
Geography of Burkina Faso
Geography of Samoa
Geography of Brunei