A standard definition of static equilibrium is:
This is a strict definition, and often the term "static equilibrium" is used in a more relaxed manner interchangeably with "mechanical equilibrium", as defined next.
A standard definition of mechanical equilibrium for a particle is:
The necessary conditions for mechanical equilibrium for a system of particles are:
As applied to a rigid body, the necessary and sufficient conditions become:
A rigid body in mechanical equilibrium is undergoing neither linear nor rotational acceleration; however it could be translating or rotating at a constant velocity.
However, this definition is of little use in continuum mechanics, for which the idea of a particle is foreign. In addition, this definition gives no information as to one of the most important and interesting aspects of equilibrium states – their stability.
An alternative definition of equilibrium that applies to conservative systems and often proves more useful is:
Because of the fundamental relationship between force and energy, this definition is equivalent to the first definition. However, the definition involving energy can be readily extended to yield information about the stability of the equilibrium state.
For example, from elementary calculus, we know that a necessary condition for a local minimum or a maximum of a differentiable function is a vanishing first derivative (that is, the first derivative is becoming zero). To determine whether a point is a minimum or maximum, one may be able to use the second derivative test. The consequences to the stability of the equilibrium state are as follows:
- Second derivative < 0 : The potential energy is at a local maximum, which means that the system is in an unstable equilibrium state. If the system is displaced an arbitrarily small distance from the equilibrium state, the forces of the system cause it to move even farther away.
- Second derivative > 0 : The potential energy is at a local minimum. This is a stable equilibrium. The response to a small perturbation is forces that tend to restore the equilibrium. If more than one stable equilibrium state is possible for a system, any equilibria whose potential energy is higher than the absolute minimum represent metastable states.
- Second derivative = 0 or does not exist: The second derivative test fails, and one must typically resort to using the first derivative test. Both of the previous results are still possible, as is a third: this could be a region in which the energy does not vary, in which case the equilibrium is called neutral or indifferent or marginally stable. To lowest order, if the system is displaced a small amount, it will stay in the new state.
In more than one dimension, it is possible to get different results in different directions, for example stability with respect to displacements in the x-direction but instability in the y-direction, a case known as a saddle point. Without further qualification, an equilibrium is stable only if it is stable in all directions.
The special case of mechanical equilibrium of a stationary object is static equilibrium. A paperweight on a desk would be in static equilibrium. The minimal number of static equilibria of homogeneous, convex bodies (when resting under gravity on a horizontal surface) is of special interest. In the planar case, the minimal number is 4, while in three dimensions one can build an object with just one stable and one unstable balance point, this is called Gomboc. A child sliding down a slide at constant speed would be in mechanical equilibrium, but not in static equilibrium.
An example of mechanical equilibrium will be a person trying to press a spring, he can push it up to a point after which it reaches a state where the force trying to compress it and the resistive force from the spring are equal, so the person can not further press it, at this state the system will be in mechanical equilibrium. When the pressing force is removed the spring attains its original state.
Full article ▸