Power factor

related topics
{system, computer, user}
{math, energy, light}
{rate, high, increase}
{ship, engine, design}
{build, building, house}
{law, state, case}
{acid, form, water}
{school, student, university}

The power factor of an AC electric power system is defined as the ratio of the real power flowing to the load to the apparent power in the circuit,[1][2] and is a dimensionless number between 0 and 1 (frequently expressed as a percentage, e.g. 0.5 pf = 50% pf). Real power is the capacity of the circuit for performing work in a particular time. Apparent power is the product of the current and voltage of the circuit. Due to energy stored in the load and returned to the source, or due to a non-linear load that distorts the wave shape of the current drawn from the source, the apparent power will be greater than the real power.

In an electric power system, a load with a low power factor draws more current than a load with a high power factor for the same amount of useful power transferred. The higher currents increase the energy lost in the distribution system, and require larger wires and other equipment. Because of the costs of larger equipment and wasted energy, electrical utilities will usually charge a higher cost to industrial or commercial customers where there is a low power factor.

Linear loads with low power factor (such as induction motors) can be corrected with a passive network of capacitors or inductors. Non-linear loads, such as rectifiers, distort the current drawn from the system. In such cases, active or passive power factor correction may be used to counteract the distortion and raise the power factor. The devices for correction of the power factor may be at a central substation, spread out over a distribution system, or built into power-consuming equipment.


Full article ▸

related documents
Pulse-width modulation
Transistor–transistor logic
Charge-coupled device
Dolby Digital
Dual-tone multi-frequency
Advanced Mobile Phone System
Video Toaster
Doctor V64
Data transmission
Multiprotocol Label Switching
SUSE Linux
Frequency-hopping spread spectrum
Keystroke logging
Graphical Environment Manager
Virtual LAN
Load balancing (computing)
Personal digital assistant
IP address
Xerox Star
Time division multiple access
Digital Video Broadcasting
Symmetric multiprocessing
Desktop environment
Ethernet over twisted pair