Torpedo tube

related topics
{ship, engine, design}
{island, water, area}
{build, building, house}

A torpedo tube is a device for launching torpedoes in a horizontal direction.

There are two main types of torpedo tube:

  • Those designed to operate below water level, as fitted to submarines and some surface ships
  • Deck-mounted torpedo launchers on surface ships only

Some authorities prefer to reserve the term torpedo tube for submarine type torpedo tubes, referring to deck-mounted units as torpedo launchers, but the more general use has long been widespread among both lay people and arms manufacturers.

There are essential differences between the two types other than the obvious one of operating in air as opposed to water. Deck-mounted launchers are normally designed for a specific munition, and often for a particular model of that munition. On the other hand, the torpedo tube is the submarine's general purpose launcher, with many designs capable of using more than one size of torpedo, as well as other munitions including mines and cruise missiles.

Some nuclear submarines, both US and Soviet, were fitted with two sizes of torpedo tube. On these boats a set of smaller tubes were dedicated to firing torpedoes, while the larger tubes were intended to fire a wide variety of munitions. This provided versatility and firepower while saving space, cost and complexity over an armament of all larger tubes.

On the older Soviet boats such as the Hotel class submarine, the smaller tubes were 16 inch, with the general purpose tubes being the standard 21 inch. On others, such as the Soviet Akula class submarine, the smaller tubes were 21 inch. More recently both navies appear to be returning to a smaller number of only 21 inch tubes.

See torpedo for a list of torpedo sizes.

Submarine torpedo tube

A submarine torpedo tube is a more complex mechanism than a torpedo tube on a surface ship, because the tube has to accomplish the function of moving the torpedo from the normal atmospheric pressure within the submarine into the sea at the ambient pressure of the water around the submarine. Thus a submarine torpedo tube operates on the principle of an airlock.

Torpedo tube operation

The accompanying diagram illustrates the operation of a submarine torpedo tube. The diagram is somewhat simplified but shows the workings of a submarine torpedo launch.

A torpedo tube has a considerable number of interlocks for safety reasons. For example, an interlock prevents the breech door and muzzle door from opening at the same time. Also, the breech door cannot be opened when the tube is filled with water.

The submarine torpedo launch sequence is, in simplified form:

Spare torpedoes are stored behind the tube in racks.

Speed is a desirable feature of a torpedo loading system, but safety is paramount. There are various manual and hydraulic handling systems for loading torpedoes into the tubes. Prior to the Ohio class, U.S. SSBN's utilized manual block and tackle which took about 15 minutes to load a tube. SSN's prior to the Seawolf class used a hydraulic system that was much faster and safer in conditions where the ship needed to maneuver.

The German Type 212 submarine uses a new development of the water ram expulsion system, which ejects the torpedo with water pressure to avoid acoustic detection.

External links

Full article ▸

related documents
Miller cycle
Mikoyan-Gurevich MiG-21
Steam turbine
Auxiliary power unit
MGM-51 Shillelagh
AIM-7 Sparrow
Reciprocating engine
Katyusha rocket launcher
Trident missile
V-2 rocket
Bristol Beaufighter
Bachem Ba 349
Submachine gun
CH-47 Chinook
Aerospike engine
Mary Rose
USS Big Horn (AO-45)
German Type VII submarine
Boeing RC-135
IMI Galil
Apollo 13
Ground effect in aircraft
LGM-30 Minuteman
Viking program
Heinkel He 162
Armor-piercing shot and shell