Next: PRESENT GRAPH LINE Line_definition
Up: PRESENT GRAPH Mode
Previous: PRESENT GRAPH BEAM Elements
This command will produce a graph showing the variation of results at a specified element (see note 2) across the range of loadcases specified in the RESULTS LOADCASE command. If more than one element is specified then graphs for each (up to a limit of 1000) will be superimposed. The required elements can be an OLD list (the last element or elements to be graphed), they can be specified as part of the command, or they can be taken from a specified set (see note 1).
Notes:
However, if a list of elements is entered as part of the PRESENT GRAPH ELEMENT command, then after each element number the option is given to specify what value for that element is to be used. The choice available is NODE n, GAUSS n, MAX [ABSOLUTE], MIN [ABSOLUTE], or MEAN, making it possible to graph variation at specific element nodes (for elementwise nodal results) or specific Gauss points (for elementwise Gaussian results) as well as extreme or mean values for an element. If NODE is specified, then the node number entered is the model node number and the user should ensure that the node is actually part of the associated element. If GAUSS is specified, then the Gauss point number is local to the associated element and refers to the order in which the Gauss point results were entered into FEMVIEW.
Examples:
A graph of the currently selected results and those previously stored in the results stack at the previously selected element(s) against loadcases is drawn.
A graph of results at the specified elements against loadcases is drawn.
A graph of (elementwise nodal) results at the nodes 2, 15 and 47 in elements 1, 7 and 22 respectively is plotted against loadcases.
A graph of (elementwise Gaussian) results at the 2nd, 3rd and 1st Gauss points in elements 1, 7 and 22 respectively is plotted against loadcases.
A graph of the maximum and minimum results values for element 36 against loadcases is drawn.
A graph of results at the elements in the set `bracket' against loadcases is drawn.
See also the following commands
'PRESENT GRAPH NODE'
'PRESENT OPTIONS GRAPH'
'RESULTS LOADCASE'
'RESULTS RANGE'
'RESULTS STACK'
Femsys Limited