VIEW GEOMETRY Part [Colour]

                

FEMGEN Command only.

This command allows the user to display selected geometric parts that have been used for the geometric construction of the model.

Part Colour Comments

Partname [RED] Displays the named geometric part in the

[ORANGE] specified colour (see note 1). The default

[YELLOW] colour is yellow. [GREEN] [BLUE] [VIOLET] [WHITE]

ALL (colours as above) Displays all the geometric parts in the specified colour. The default colour is yellow.

CURRENT (colours as above) Displays all the currently displayed geometric parts in the specified colour. The default colour is yellow.

OFF -- Turns off the display of geometry.

Return Level: VIEW GEOMETRY except for ALL or OFF

Notes:

1.

Displaying named geometric parts
When displaying named parts the name may be prefixed with a `+' or `-' sign to indicate if the part is to be added to, or subtracted from, the current display. If no `+' or `-' sign is prefixed then the display screen is cleared and only the named part is displayed and all labels will be removed. Note that it is not possible to remove parts that were not separately added by name.

Examples:

1.

VIEW GEOMETRY Wing

The geometric part named `Wing' is displayed.

2.

VIEW GEOMETRY +Tail

The geometric part `Tail' is added to the existing display.

3.

VIEW GEOMETRY CURRENT VIOLET

Redraws the currently displayed geometric parts in violet.