Amplitude distortion

related topics
{system, computer, user}
{math, energy, light}
{math, number, function}

Amplitude distortion is distortion occurring in a system, subsystem, or device when the output amplitude is not a linear function of the input amplitude under specified conditions.

Generally, output is a linear function of input only for a fixed portion of the transfer characteristics. In this region, Ic=βIb where Ic is collector current and Ib is base current, following linear relation y=mx.

When output is not in this portion, two forms of amplitude distortion might arise

Due to the additional outputs, this form of distortion is definitely unwanted in audio, radio and telecommunication amplifiers, and it occurs for more than two waves as well.

In a narrowband system such as a radio communication system, unwanted outputs such as X-Y and 2X+Y will be remote from the wanted band and so be ignored by the system. In contrast, 2X-Y and 2Y-X will be close to the wanted signals. These so-called third order distortion products (third order as m+n = 3) tend to dominante the non-linear distortion of narrowband systems.

Amplitude distortion is measured with the system operating under steady-state conditions with a sinusoidal input signal. When other frequencies are present, the term "amplitude" refers to that of the fundamental only.

External links

See also

Full article ▸

related documents
KMail
KA9Q
Frame synchronization
Intel 80486SX
Demon dialing
Commodore 1570
XGA
Freescale 68HC11
Supervisory program
Total Access Communication System
IBM 801
Intel 80188
Isochronous burst transmission
MOS Technology 6507
Microelectronics
Freeware
Raster graphics
Intel 80486DX4
On-hook
Voice operated switch
Common management information service
Viewdata
Memory hierarchy
Amiga 2000
Symmetric Digital Subscriber Line
BESK
Multi-user
Private line
End-to-end connectivity
IceWM