Diffusion pump

related topics
{ship, engine, design}
{acid, form, water}
{math, energy, light}
{work, book, publish}

Diffusion pumps use a high speed jet of vapor to direct gas molecules in the pump throat down into the bottom of the pump and out the exhaust. Presented in 1915 by Wolfgang Gaede[1] and using mercury vapor, they were the first type of high vacuum pumps operating in the regime of free molecular flow, where the movement of the gas molecules can be better understood as diffusion than by conventional fluid dynamics. Gaede used the name diffusion pump since his design was based on the finding that gas cannot diffuse against the vapor stream, but will be carried with it to the exhaust.[2] However, the principle of operation might be more precisely described as gas-jet pump, since diffusion plays a role also in other high vacuum pumps. In modern text books, the diffusion pump is categorized as a momentum transfer pump. The diffusion pump is widely used in both industrial and research applications. Most modern diffusion pumps use silicone oil as the working fluid. Cecil Reginald Burch discovered the possibility of using silicone oil in 1928.[3]

Contents

Oil diffusion pumps

The oil diffusion pump is operated with an oil of low vapor pressure. Its purpose is to achieve higher vacuum (lower pressure) than is possible by use of positive displacement pumps alone. Although its use has been mainly associated within the high-vacuum range (down to 10-9 mbar), diffusion pumps today can produce pressures approaching 10-10 mbar when properly used with modern fluids and accessories. The features that make the diffusion pump attractive for high and ultra-high vacuum use are its high pumping speed for all gases and low cost per unit pumping speed when compared with other types of pump used in the same vacuum range. Diffusion pumps cannot discharge directly into the atmosphere, so a mechanical forepump is typically used to maintain an outlet pressure around 0.1 mbar.


The high speed jet is generated by boiling the fluid and directing the vapor through a jet assembly. Note that the oil is gaseous when entering the nozzles. Within the nozzles, the flow changes from laminar, to supersonic and molecular. Often several jets are used in series to enhance the pumping action. The outside of the diffusion pump is cooled using either air flow or a water line. As the vapor jet impacts the outer cooled shell of the diffusion pump, the working fluid condenses and is recovered and directed back to the boiler. The pumped gases continue flowing to the base of the pump at increased pressure, flowing out through the diffusion pump outlet, where they are compressed to ambient pressure by the secondary mechanical forepump and exhausted.

Full article ▸

related documents
Advanced gas-cooled reactor
Lubricant
Electricity generation
Kerosene
Dirty bomb
Ship-Submarine Recycling Program
Fusion rocket
HVAC
Hypergolic propellant
Liquid air cycle engine
Ultracentrifuge
Seawolf class submarine
Slats
Radiological weapon
Engine
Northrop F-5
USS Holland (SS-1)
Thomas Savery
Planform
Rocket launch
Antimatter catalyzed nuclear pulse propulsion
Monoplane
Project Pluto
John Browning
Aerobatics
Diamant
Eductor-jet pump
JATO
Electric boat
Long gun