Progressive or noninterlaced scanning is a way of displaying, storing or transmitting moving images in which all the lines of each frame are drawn in sequence. This is in contrast to the interlacing used in traditional television systems where only the odd lines, then the even lines of each frame (each image now called a field) are drawn alternately.
The system was originally known as "sequential scanning" (actually a more technically correct description) when it was used in the Baird 240 line television transmissions from Alexandra Palace, England in 1936. It was also used in Baird's experimental transmissions using 30 lines in the 1920s.
The rough animation to the right compares progressive scan with interlace scan, also demonstrating the interline twitter effect associated with interlace. On the left are two progressive scan images. Center are two interlaced images. Right are two images with line doublers. Top are original resolution, bottom are with anti-aliasing. The interlaced images use half the bandwidth of the progressive ones. The images in the center column precisely duplicate the pixels of the ones to the left, but interlace causes details to twitter. Real interlaced video blurs such details to prevent twitter, but as seen on the bottom row, such softening (or anti-aliasing) comes at the cost of image clarity. A line doubler could not restore the previously interlaced image at bottom center to the full quality of the progressive image on the top left.
(Note - Because the refresh rate has been slowed down by a factor of three, and the resolution is less than half that of typical interlaced video, the flicker in the simulated interlaced portions and also the visibility of the black lines in this image are exaggerated. Also, the images above are based on what it would look like on a monitor that does not support interlaced scan, such as a PC monitor, or an LCD or plasma-based television set, with the interlaced images displayed using the same mode as the progressive images.)
Usage in storing or transmitting
Progressive scan is used for scanning and storing film-based material on DVDs, for example, as 480p24 or 576p25 formats.
Usage in TVs, video projectors and monitors
Progressive scan (also known as: P-Scan) is used for most cathode ray tube (CRT) computer monitors, all LCD computer monitors, and most HDTVs as the display resolutions are progressive by nature. (Other CRT-type displays, such as SDTVs, typically display interlaced video only)
Some TVs, and most video projectors have one or more progressive scan inputs. Before HDTV became common, some high end displays supported 480p (480 vertical lines of resolution with progressive scan.) This allowed these displays to be used with devices which output progressive scan like progressive scan DVD players and certain video game consoles. HDTVs support the progressively scanned resolutions of 480p and 720p. 1080p displays are available, but are usually more expensive than the comparable lower resolution HDTV models. Computer monitors can use even greater display resolutions.
Full article ▸