Sample File berfv.log from an interactive run

======================================================
BERSAFE to FEMVIEW Version 1               Release 406
FEMGEN/FEMVIEW Version 2.1                Release 02.A
Copyright :  Femview Limited
Installed for : FEMVIEW LTD
Installation Date :                          13 MAY 92
Expiry Date :                                31 DEC 92
Run Time/Date :                     14:54:09 13 MAY 92 
======================================================

ENTER 1,2,OR 3 (11,12,13 FOR VERBOSE) (1)> 

ENTER FULL NAME OF BERSAFE RESULTS FILE >FRED.F2

*** BERSAFE RESULTS FILE OPENED ***
 
*** PROCESSING ADMINISTRATION DATA ***

BERSAFE MODEL DATA:
===================================
MAXIMUM NODE NUMBER          =  125
NUMBER OF ELEMENTS           =   64
NUMBER OF LOAD CASES         =    1
NUMBER OF MATERIALS          =    1
NUMBER OF DIRECTION COSINES  =    1
NUMBER OF PRESCRIBED
DISPLACEMENTS/LOAD CASE      =   75

ENTER ANALYSIS TYPE (P/C/S) (S)> 

CREATE NEW MODEL OR APPEND RESULTS TO OLD MODEL? (C/A) (C)> 

ENTER MODEL NAME (MAX 6 CHARACTERS) >FRED

ARE MATERIAL NAMES SPECIFIED IN mmMggg NOTATION? (Y/N) (N)> 

AUTOMATIC LOADCASE NAME GENERATION? (Y/N) (Y)> 

ENTER LOADCASE NUMBER FOR FIRST LOADCASE (1)> 

ENTER RESULTS OUTPUT COORDINATE SYSTEM (CA/CY/SP) (CA)> 

DO YOU WANT TO PROCESS NODAL TEMPERATURES? (Y/N) (N)> 

OUTPUT DISPLACEMENTS? (Y/N) (Y)> 

OUTPUT NODAL AVERAGED STRESSES? (Y/N) (Y)> 

OUTPUT ELEMENT NODAL STRESSES? (Y/N) (Y)> 

OUTPUT GAUSSIAN STRESSES? (Y/N) (Y)> 

OUTPUT NODAL AVERAGED STRAINS? (Y/N) (Y)>N

OUTPUT ELEMENT NODAL STRAINS? (Y/N) (Y)>N

OUTPUT GAUSSIAN STRAINS? (Y/N) (Y)>N

TRANSFORM SHELL STRESSES TO GLOBAL? (Y/N) (N)> 

RESULT CO-ORDINATE SYSTEMS FROM BERSAFE CARD 01:
================================================
ICOORD(1) =    0
ICOORD(2) =    0
ICOORD(3) =    0
ICOORD(4) =    0

MATERIAL NAME TO NUMBER MAPPINGS
==========================================
MATERIAL NO.  1 IS BERSAFE MATERIAL   MAT1                                     


*** STARTING CONVERSION ***

*** READING MESH DATA ***
*** PROCESSING TOPOLOGY ***
*** PROCESSING CO-ORDINATES ***
*** PROCESSING DISPLACEMENTS ***
*** RESULTS FOR LOADCASE L1     'LOAD CASE  1'      ***
*** PROCESSING STRESSES ***
*** PROCESSING ELEMENT NODAL POINT STRESSES ***
*** PROCESSING AVERAGE NODAL STRESSES ***
*** PROCESSING GAUSS POINT STRESSES ***
*** BUILDING DISPLAY DATASETS ***

*** CONVERSION FINISHED ***