Sample File berfv.log from a failed batch run

*** STARTUP FILE berstr.str FOUND ***
*** SWITCHING TO BATCH FILE MODE  ***

======================================================
BERSAFE to FEMVIEW Version 1               Release 406
FEMGEN/FEMVIEW Version 2.1                Release 02.A
Copyright :  Femview Limited
Installed for : FEMVIEW LTD
Installation Date :                          13 MAY 92
Expiry Date :                                31 DEC 92
Run Time/Date :                     14:54:09 13 MAY 92 
======================================================

ENTER 1,2,OR 3 (11,12,13 FOR VERBOSE) (1)> 

ENTER FULL NAME OF BERSAFE RESULTS FILE >FRED.F2

*** BERSAFE RESULTS FILE OPENED ***
 
*** PROCESSING ADMINISTRATION DATA ***

BERSAFE MODEL DATA:
===================================
MAXIMUM NODE NUMBER          =  125
NUMBER OF ELEMENTS           =   64
NUMBER OF LOAD CASES         =    1
NUMBER OF MATERIALS          =    1
NUMBER OF DIRECTION COSINES  =    1
NUMBER OF PRESCRIBED
DISPLACEMENTS/LOAD CASE      =   75

ENTER ANALYSIS TYPE (P/C/S) (S)> 

CREATE NEW MODEL OR APPEND RESULTS TO OLD MODEL? (C/A) (C)> 

ENTER MODEL NAME (MAX 6 CHARACTERS) >FRED
ERROR: CANNOT CREATE, MODEL ALREADY EXISTS

***    ERROR DETECTED     ***
*** BATCH MODE TERMINATED ***