Next: UTILITY SETUP PLOTTER Control Up: UTILITY SETUP Mode Control Previous: UTILITY SETUP FEEDBACK Type Control
Next: UTILITY SETUP PLOTTER Control
Up: UTILITY SETUP Mode Control
Previous: UTILITY SETUP FEEDBACK Type Control
This command enables the user to control the display of the command menus which appear in the command column on the right of the screen.
| Control | Comments |
| ON | Switches on the display of command menus. This is the default. |
| OFF | Switches off the display of command menus. The command column is |
| removed. | |
| `n' | Integer specifying the number of characters to be used for the display |
| of command words in the command menus. A minimum of 4 and a | |
| maximum of 20 characters is allowed. The default is that 8 characters is | |
| used. The width of the command column is adjusted accordingly. |
Examples:
This command switches on the display of the command menus.
This command switches off the display of the command menus. The drawing of the model will be redisplayed so that the whole of the screen is used.
This command sets the number of characters used for the display of command words to 6. The width of the command column is adjusted.
Femsys Limited