Next: Notes Up: Evaluating Mesh Quality Previous: Overall Quality Value
Next: Notes
Up: Evaluating Mesh Quality
Previous: Overall Quality Value
This command sets the proportion of NODOFF to the overall quality value to 0.7
for the element type BE3.
This command sets ASPECT to be .35 for QU4 elements.
This command labels all elements that fail the Maximum Angle test.
This command labels all elements on surface SUR5 to indicate
how many quality tests each element failed.
This command labels all elements on surface SUR5 to indicate
those that fail the total quality test.
Each element that has failed at least one of the quality tests is listed. Values will not be written for tests which have been passed (unless the user specifies COMPLETE).
The first test to fail is indicated by an asterisk `*' as shown below:
ELEMENT QUALITY : Failures Only
------- -------
ELEMENT MINANG MAXANG ASPECT NODOFF BULGE WARP JACOB RADRAT TOTAL PART
1 *140 - - - - S1
25 *141 - - - - S1
26 *34 - - - - S1
55 *34 140 - - - - S2
56 *39 - - - - S2
59 *36 140 - - - - S2
63 *38 - - - - S2
7 elements have failed the quality tests
A * indicates the first test failed
This command tabulates the quality values for elements on S2 which fail.
ELEMENT QUALITY : Failures Only
------- -------
ELEMENT MINANG MAXANG ASPECT NODOFF BULGE WARP JACOB RADRAT TOTAL PART
55 *34 .14E3 - - - - S2
56 *39 - - - - S2
59 *36 .14E3 - - - - S2
63 *38 - - - - S2
7 elements have failed the quality tests
A * indicates the first test failed
This command tabulates the quality values for all of the elements in S1 whether or not they failed. Tests which have been failed are marked with an hash symbol ` # ' .
ELEMENT QUALITY : Complete Information
------- -------
ELEMENT MINANG MAXANG ASPECT NODOFF BULGE WARP JACOB RADRAT TOTAL PART
55 #34 #.14E3 .84 - - 0 - - .7 S3
56 #39 .14E3 .72 - - 0 - - .71 S3
57 44 .13E3 .61 - - 0 - - .72 S3
58 52 .13E3 .52 - - 0 - - .74 S3
59 #36 #.14E3 .75 - - 0 - - .7 S3
60 40 .14E3 .84 - - 0 - - .73 S3
61 46 .13E3 .71 - - 0 - - .74 S3
62 53 .12E3 .6 - - 0 - - .76 S3
63 #38 .14E3 .6 - - 0 - - .69 S3
64 42 .13E3 .7 - - 0 - - .73 S3
4 elements have failed the quality tests
A # indicates the test failed
ELEMENT QUALITY : Current Settings
------- -------
ELEMENT MINANG MAXANG ASPECT NODOFF BULGE WARP JACOB RADRAT TOTAL
BE3 C - - - .1 .1 - - - .4
W - - - .5 .5 - - - 1
TR3 C 25 150 .12 - - - - - .4
W .34 .33 .33 - - - - - 1
QU4 C 40 140 .12 - - .1 - - .4
W .25 .25 .25 - - .25 - - 1
TR6 C 20 150 .12 .1 .1 - - - .4
W .2 .2 .2 .2 .2 - - - 1
QU8 C 35 145 .12 .1 .1 - - - .4
W .2 .2 .2 .2 .2 - - - 1
QU9 C 35 145 .12 .1 .1 - - - .4
W .2 .2 .2 .2 .2 - - - 1
PE6 C 30 150 .12 - - .1 0 - .4
W .2 .2 .2 - - .2 .2 - 1
HE8 C 40 140 .12 - - .1 0 - .4
W .2 .2 .2 - - .2 .2 - 1
PE15 C 30 150 .12 .1 .1 - 0 - .4
W .166 .166 .166 .166 .166 - .166 - 1
HE16 C 40 150 .12 .1 .1 - 0 - .4
W .166 .166 .166 .166 .166 - .166 - 1
HE20 C 35 145 .12 .1 .1 - 0 - .4
W .166 .166 .166 .166 .166 - .166 - 1
HE27 C 35 145 .12 .1 .1 - 0 - .4
W .166 .166 .166 .166 .166 - .166 - 1
QU12 C 35 145 .12 .1 .1 - - - .4
W .2 .2 .2 .2 .2 - - - 1
TR9 C 20 150 .12 .1 .1 - - - .4
W .2 .2 .2 .2 .2 - - - 1
TR15 C 20 150 .12 .1 .1 - - - .4
W .2 .2 .2 .2 .2 - - - 1
BE4 C - - - .1 .1 - - - .4
W - - - .5 .5 - - - 1
BE5 C - - - .1 .1 - - - .4
W - - - .5 .5 - - - 1
PE24 C 30 150 .12 .1 .1 - 0 - .4
W .166 .166 .166 .166 .166 - .166 - 1
HE32 C 35 145 .12 .1 .1 - 0 - .4
W .166 .166 .166 .166 .166 - .166 - 1
TE4 C 20 160 .12 - - - 0 5 .4
W .2 .2 .2 - - - .2 .2 1
TE10 C 20 160 .12 .1 .1 - 0 5 .4
W .142 .142 .142 .142 .142 - .142 .142 1
TE16 C 20 160 .12 .1 .1 - 0 5 .4
W .142 .142 .142 .142 .142 - .142 .142 1
C indicates the test criteria.
W indicates the test weight.
This command will tabulate the quality criterion and weight values for the PE15 element.
ELEMENT QUALITY : Current Settings
------- -------
ELEMENT MINANG MAXANG ASPECT NODOFF BULGE WARP JACOB RADRAT TOTAL
PE15 C 30 150 .12 .1 .1 - 0 - .4
W .166 .166 .166 .166 .166 - .166 - 1
C indicates the test criteria.
W indicates the test weight.
This command will tabulate the quality criterion and weight values either for all element types, or if mesh quality commands UTILITY TABULATE MESH QUALITY or LABEL MESH QUALITY have been issued then for those element types encountered during the processing of those commands.
ELEMENT QUALITY : Current Settings
------- -------
ELEMENT MINANG MAXANG ASPECT NODOFF BULGE WARP TOTAL
QU4 C 60. 120. .75 - - .3 .45
W .25 .25 .25 - - .25 1.
C indicates the test criteria.
W indicates the test weight.
Femsys Limited