2005 2004 2003 2002 2001 2000 1999 1998 1997 1996 1995 1994 1993 1992 1991 1990 1989 1988 1987 1986 1985 1984 1983 1981 1980 1979 1977 1976 1975 1974 1973 1972
Electronic reprint available (PDF format)
Web link
A. Articles in Journals and Proceedings
| RJ = | Refereed Journal |
| IRP = | Invited/Refereed Proceedings |
| IP = | Invited Proceedings |
| RP = | Refereed Proceedings |
| CP = | Contributed Proceedings |
2005
| (812 ) C.R. Martin, I.A. Aksay "Microchannel molding: A soft lithography-inspried approach to micrometer-scale patterning" Journal of Materials Research 20 1995-2005 (2005) |
|
2004
2003
2002
2001
2000
1999
1998
1997
1996
1995
| (CP21) M. Sarikaya, J. Liu, and I. A. Aksay, "Nacre: Properties, Crystallography, Morphology, and Formation" in Biomimetics: Design and Processing of Materials, eds. M. Sarikaya and I. A. Aksay, AIP Press, Woodbury, NY, 1995, 35-90 (1995) | ||
| (IP22) I. A. Aksay and R. H. Baughman, "Energy Storage Materials and Processes" in Basic Research Needs for the Vehicles of the Future, ed. P. M. Eisenberger (Princeton Materials Institute, Princeton University, Princeton, NJ, 1995), 1-10 (1995) | ||
| (IP23) I. A. Aksay and D. M. Dabbs, "Bioinspired Processing of Nanostructured Materials" in Proc. 8th International Metallurgy and Materials Congress, Istanbul (Chamber of Metallurgical Engrs, Turkey, Publ. 32, 1995) 775-94 (1995) | ||
| (IP24) I. A. Aksay, D. M. Dabbs, I. Honma, S. Manne, D. L. Milius, N. Nakagawa, M. Trau, and N. Yao, "Synthesis and Processing of Nanostructured Ceramics" in Neptis-IV: Nano-sized Powders and Related Composite Materials (Nisshin Engineering Co., Ltd., Japan, 1995) 49-57 (1995) | ||
| (RJ57) H. F. Fong, B. Keimer, P. W. Anderson, D. Reznik, F. Dogan, and I. A. Aksay, "Phonon and Magnetic Neutron Scattering at 41 meV in YBa2Cu3O7" Phys. Rev. Lett. 75 [2] 316-19 (1995) | ||
| (RJ58) B. Keimer, W. Y. Shih, I. A. Aksay, J. W. Lynn and R. W. Erwin, comment on "Vortex Lattice Symmetry and Electronic Structure in YBa2Cu3O7" Phys. Rev. Lett. 75 [7] 1423 (1995) | ||
| (RJ59) B. Keimer, H. F. Fong, D. Reznik, and I. A. Aksay, "Resonant Neutron Scattering from YBa2Cu3O7" J. Phys. Chem. Solids 56 [12] 1927-29 (1995) | ||
| (RJ60) D. Reznik, B. Keimer, F. Dogan and I. A. Aksay, "q Dependence of Self-Energy Effects of the Plane Oxygen Vibration in YBa2Cu3O7" Phys. Rev. Lett. 75 [12] 2396-99 (1995) | ||
| (RJ61) Y. Sakka, D. D. Bidinger, and I. A. Aksay, "Processing of SiC-Mullite-Al2O3 Nanocomposites" J. Am. Ceram. Soc. 78 [2] 479-86 (1995) | ||
| (RJ62) W. Y. Shih, W.-H. Shih, and I. A. Aksay, "Elimination of an Isolated Pore: Effect of Grain Size" J. Mater. Res. 10 [4] 1000-15 (1995) | ||
| (RJ63) M. Trau, S. Sankaran, D. A. Saville, and I. A. Aksay, "Electric-Field-induced Pattern Formation in Colloidal Dispersions" Nature 374 437-39 (1995) | ||
| (RJ64) M. Trau, S. Sankaran, D. A. Saville, and I. A. Aksay, "Pattern Formation in Non-Aqueous Colloidal Dispersions via Electrohydrodynamic Flow" Langmuir 11 4665-72 (1995) | ||
| (RP60) C. M. Chun, A. Navrotsky, and I. A. Aksay, "Aggregation Growth of Nanometer-Sized BaTiO3 Particles" in Proc. Microscopy and Microanalysis, eds.: G. W. Bailey, M. H. Ellisman, R. A. Hennigar, and N. J. Zaluzec, (Jones and Begell Pub., New York, 1995) 188-89 (1995) | ||
| (RP61) J. W. Mellowes, C. M. Chun, and I. A. Aksay, "Amorphous Silica Coating on a-Alumina Particles" in Proc. Microscopy and Microanalysis, eds.: G. W. Bailey, M. H. Ellisman, R. A. Hennigar, and N. J. Zaluzec, (Jones and Begell Pub., New York, 1995) 212-13 (1995) | ||
| (RP62) U. Srinivasan, I. Homma, C. M. Chun, D. M. Dabbs, D. A. Hajduk, S. M. Gruner, and I. A. Aksay, "Nanocomposite Processing via Infiltration of Mesoporous Silica" in Proc. Microscopy and Microanalysis, eds.: G. W. Bailey, M. H. Ellisman, R. A. Hennigar, and N. J. Zaluzec, (Jones and Begell Pub., New York, 1995) 210-11 (1995) | ||
| (RP63) E. P. Vicenzi, J. S. Lettow, D. L. Milius, and I. A. Aksay, "Platinum Distribution in Large Single Crystals of YBa2Cu3O7-x" in Microbeam Analysis-95: Proc. 29th Ann. Conf. Microbeam Analysis Society, ed.: E. S. Etz (VCH Publ, Inc., New York, 1995) 421-22 (1995) | ||
| (RP64) N. Yao and I. A. Aksay, "Direct Observation of Hymenes in Diatoms by Low Voltage SEM" in Proc. Microscopy and Microanalysis, eds.: G. W. Bailey, M. H. Ellisman, R. A. Hennigar, and N. J. Zaluzec, (Jones and Begell Publ., New York, 1995) 208-09 (1995) | ||
| (RP65) N. Yao, W. Y. Shih, D. M. Dabbs, and I. A. Aksay, "The Breakup of the Intermediate Gold Aggregates" in Proc. Microscopy and Microanalysis, eds.: G. W. Bailey, M. H. Ellisman, R. A. Hennigar, and N. J. Zaluzec, (Jones and Begell Pub., New York, 1995) 196-97 (1995) |
1994
| (RJ46) J. S. Abel, G. J. Stangle, C. H. Schilling, and I. A. Aksay, "Sedimentation in Flocculating Colloidal Suspensions" J. Mater. Res. 9 [2] 451-61 (1994) | ||
| (RJ47) Y.-N. Jun, D. M. Dabbs, I. A. Aksay, and S. Erramilli, "Processing of Monolithic Magnetic Gels for Magnetophoresis" Langmuir, 10 [10] 3377-79 (1994) | ||
| (RJ48) B. Keimer, J. W. Lynn, R. W. Erwin, F. Dogan, W. Y. Shih, and I. A. Aksay, "Vortex Structures in YBa2Cu3O7 (invited), J. Appl. Phys.,76 [10] 6778-83 (1994)." (1994) | ||
| (RJ49) B. Keimer, W. Y. Shih, R. W. Erwin, J. W. Lynn, F. Dogan, and I. A. Aksay, "Vortex Lattice Symmetry and Electronic Structure in YBa2Cu3O7" Phys. Rev. Lett, 73 [25] 3459-62 (1994) | ||
| (RJ50) D. Reznik, B. Keimer, F. Dogan, and I. A. Aksay, "High-Resolution Inelastic Neutron-Scattering Study of Phonon Self-Energy Effects in YBCO" Physica C, 235-240, 1733-34 (1994) | ||
| (RJ51) Y. Sakka and I. A. Aksay, "Processing of Nanocomposites of Silicon Nitride-Mullite-Alumina by Reaction Sintering" Nanostructured Materials, 4 [2] 169-82 (1994) | ||
| (RJ52) W.-H. Shih, W. Y. Shih, S.-I. Kim, and I. A. Aksay, "Equilibrium-State Density Profiles of Centrifuged Cakes" J. Am Ceram. Soc., 77 [2] 540-46 (1994) | ||
| (RJ53) W. Y. Shih, W. -H. Shih, and I. A. Aksay, "Size Dependence of the Ferroelectric Transition of Small BaTiO3 Particles: Effect of Depolarization" Phys. Rev. B, 50 [21] 15,575-85 (1994) | ||
| (RJ54) Y.-B. Son, C.-H. Kim, S.-D. Jang, J. Liu, M. Sarikaya, and I. A. Aksay, "Crystallization Behavior of Cordierite-Based Glass with Excess SiO2 and Al2O3at Initial Stage" Jpn. J. Appl. Phys., 32 [2] 1101-08 (1994) | ||
| (RJ55) T. Yogo and I. A. Aksay, "Synthesis of Mullite Fibre form an Aluminosiloxane Precursor" J. Mater. Chem., 4 [2] 353-59 (1994) | ||
| (RJ56) Y. L. Zhang, D. L. Milius, I. A. Aksay, "The Effect of Si on the Wetting Behavior of SiC-Al System" Materials Science and Engineering (Chinese) 12 [2] 16-23 (1994) | ||
| (RP53) D. M. Dabbs, N. Yao, and I. A. Aksay, "Surfactant Mediated Deformation of Gold Particles" in Proc. 52nd Ann. Mtg. MSA, eds.: G. W. Bailey and A. J. Garratt-Reed, (Microscopy Society of America, 1994) 446-7 (1994) | ||
| (RP54) R. Humbert, M. Sarikaya, I. A. Aksay, J. W. Crabb, and C. E. Furlong, "Preliminary Characterization of Organic Nucleator and Framework Macromolecules in Mollusc Shells" MRS Symp. Proc., 330, 89-94 (1994) | ||
| (RP55) S. E. Keckler, D. M. Dabbs, N. Yao, and I. A. Aksay, "Silicification of Wood-cell Walls" in Proc. 52nd Ann. Mtg. MSA, eds.: G. W. Bailey and A. J. Garratt-Reed, (Microscopy Society of America, 1994) 428-9 (1994) | ||
| (RP56) M. D. McGehee, S. M. Gruner, N. Yao, C. M. Chun, A. Navrotsky, and I. A. Aksay, "Synthesis of Mesoscopic Structures by Co-assembly" in Proc. 52nd Ann. Mtg. MSA, eds.: G. W. Bailey and A. J. Garratt-Reed, (Microscopy Society of America, 1994) 448-49 (1994) | ||
| (RP57) T. Ren, I. A. Aksay, M. Yasrebi, N. B. Pellerin, and J. T. Staley, "Biogenic Hydroxylated Carboxylic Monomers Serve as Dispersants for Ceramic Particles" MRS Symp. Proc., 330, 113-18 (1994) | ||
| (RP58) E. B. Slamovich and I. A. Aksay, "Hydrothermal Processing of BaTiO3/polymer Films" MRS Symp. Proc., 346, 63-8 (1994) | ||
| (RP59) Y. L. Zhang, D. L. Milius, I. A. Aksay, "Effect of Structural Morphology on the Mechanical Properties of SiC/Al Ceramic-Metal Composites" Proc. 5th International Symp. on Ceramic Materials and Components for Engines (1994) |
1993
| (CP19) H. Erkalfa, Z. Misirli, T. Baykara, F. Dogan, and I. A. Aksay, "Mechanical Properties of Colloidally Processed Alumina with Cr2O3 and MnO2 Additives" in Proc. of the Third Euro-Ceramics, Vol. 3, edited by P. Duran and J. F. Fernandez (Faenza Editrice Ibérica, San Vicente, Spain, 1993) 549-53 (1993) | ||
| (CP20) S. Sevinçtav, T. Baykara, F. Dogan, and I. A. Aksay, "Monolithic a-Alumina Through Pressure Filtration of Seeded Boehmite Gels" in Proc. of the Third Euro-Ceramics, Vol. 1, edited by P. Duran and J. F. Fernandez (Faenza Editrice Ibérica, San Vicente, Spain, 1993) 687-90 (1993) | ||
| (IP21) I. A. Aksay, D. M. Dabbs, J. T. Staley, and M Sarikaya, "Bioinspired Processing of Ceramic-Matrix Composites" in Proc. of the Third Euro-Ceramics, Vol. 1, edited by P. Duran and J. F. Fernandez (Faenza Editrice Ibérica, San Vicente, Spain, 1993) 405-18 (1993) | ||
| (RJ44) K. Y. Blohowiak, D. F. Garrigus, T. S. Luhman, K. E. McCrary, M. Strasik, I. A. Aksay, F. Dogan, W. B. Hicks, J. Liu, and M. Sarikaya "Evaluation of YBa2Cu3O7-x Bulk Superconductors for High Field Magnet Applications" IEEE Trans. Appl. Superconductivity. 3 [1] 1049-52 (1993) | ||
| (RJ45) B. Keimer, F. Dogan, I. A. Aksay, R. W. Erwin, J. W. Lynn, and M. Sarikaya, "Inclined-Field Structure, Morphology, and Pinning of the Vortex Lattice in Microtwinned YBa2Cu3O7" Science, 262 [5130] 83-86 (1993) | ||
| (RP49) Y. Sakka, D. D. Bidinger, J. Liu, M. Sarikaya, and I. A. Aksay, "Processing of SiC-Mullite-Al2O3 Nanocomposite" in Proc. 16th Annual Conf. Metal Matrix, Carbon, and Ceramic Matrix Composites, edited by J. D. Buckley, NASA CP-3175 Part 1, (NASA Langley, February 1993) 15-26 (1993) | ||
| (RP50) M. Sarikaya and I. A. Aksay, "Tailoring Microstructures of Materials Through Biomimetics" in Proc. 51st Ann. Meeting EMSA, edited by G. W. Bailey and C. L. Rieder, (San Francisco Press, San Francisco, 1993), 500-01 (1993) | ||
| (RP51) C. H. Schilling, L. Bergstrom, H.-L. Ker, and I. A. Aksay, "Particle Attraction Effects on the Centrifugal Casting and Extrusion of Alumina" in Handbook on Characterization Techniques for the Solid-Solution Interface, edited by J. H. Adair, J. A. Casey, and S. Venigalla (the Am. Ceram. Soc., Westerville, OH., 1993) 35-51 (1993) | ||
| (RP52) W.-H. Shih, W. Y. Shih, S.-I. Kim, and I. A. Aksay, "Equilibrium-State Density Profiles of Centrifuged Cakes of Flocculated Suspensions" MRS Symp. Proc., 289, 251-56 (1993) |
1992
| (IP20) M. Sarikaya and I. A. Aksay, "Nacre of Abalone Shell: A Natural Multifunctional Nanolaminated Ceramic-Polymer Composite Material" Chap. 1 in Structure, Cellular Synthesis and Assembly of Biopolymers, edited by S. T. Case (Springer-Verlag, New York, 1992) 1-25 (1992) | ||
| (IRP12) L. A. Chick, C. Viney, and I. A. Aksay, "Phase Separation and Clustering in Systems of Rodlike Particles" in Ultrastructure Processing of Advanced Materials, edited by D. R. Uhlmann and D. R. Ulrich, (Wiley Interscience, New York, 1992) 201-09 (1992) | ||
| (IRP13) M. Sarikaya and I. A. Aksay, "Synthetic and Biological Nanocomposites" in Chemical Processing of Advanced Materials, edited by L. L. Hench and J. K. West (Wiley Interscience, New York, 1992) 543-55 (1992) | ||
| (RJ41) L. Bergström, C. H. Schilling, and I. A. Aksay, "Consolidation Behavior of Flocculated Alumina Suspensions" J. Am. Ceram. Soc., 75 [12] 3305-14 (1992) | ||
| (RJ42) N. B. Pellerin, G. L. Graff, D. R. Treadwell, J. T. Staley, and I. A. Aksay, "Alginate as a Ceramic Processing Aid" Biomimetics, 1 [2] 119-30 (1992) | ||
| (RJ43) T. Ren, N. B. Pellerin, J. T. Staley, G. L. Graff, and I. A. Aksay, "Dispersion of Small Ceramic Particles with Azotobacter vinelandii" Appl. Environ. Microbiol., 58 [9] 3130-35 (1992) | ||
| (RP41) L. Bergström, C. H. Schilling, and I. A. Aksay, "Compressive Yield Stresses of Flocculated Particle Suspensions" in Theoretical and Applied Rheology, Proc. XIth Int'l Congr. on Rheology, edited by P. Moldenaers and R. Keunings, (Elsevier, Amsterdam, 1992) 579-81 (1992) | ||
| (RP42) F. Dogan, J. Liu, M. Sarikaya, and I. A. Aksay, "A Study on the Formation of Hydrothermally Prepared BaTiO3 Particles" in Proc. 50th Ann. Meeting EMSA, edited by G. W. Bailey (San Francisco Press, San Francisco, 1992), 304-05 (1992) | ||
| (RP43) K. E. Gunnison, M. Sarikaya, J. Liu, and I. A. Aksay, "Structure-Mechanical Property Relationships in a Biological Ceramic-Polymer Composite: Nacre" in Hierarchically Structured Materials, MRS Symp. Proc., Vol. 255, edited by I. A. Aksay, E. Baer, M. Sarikaya, and D. A. Tirrell, (Materials Research Society, Pittsburgh, Pennsylvania, 1992) 171-84 (1992) | ||
| (RP44) G. H. Kim, M. Sarikaya, and I. A. Aksay, "Measurement of Residual Stresses in B4C-Al Cermets by CBED" in Proc. 50th Ann. Meeting EMSA, edited by G. W. Bailey (San Francisco Press, San Francisco, 1992) 154-55 (1992) | ||
| (RP45) J. Liu, K. E. Gunnison, M. Sarikaya, and I. A. Aksay, "A TEM Study of the Interface Between Organic Matrix and Aragonite in a Biological Hard Tissue, Nacre" in Proc. 50th Ann. Meeting EMSA, edited by G. W. Bailey (San Francisco Press, San Francisco, 1992) 1024-25 (1992) | ||
| (RP46) J. Liu, M. Sarikaya, and I. A. Aksay, "A Hierarchically Structured Model Composite: A TEM Study of the Hard Tissue of Red Abalone" in Hierarchically Structured Materials, MRS Symp. Proc., Vol. 255, edited by I. A. Aksay, E. Baer, M. Sarikaya, and D. A. Tirrell, (Materials Research Society, Pittsburgh, Pennsylvania, 1992) 9-17 (1992) | ||
| (RP47) M. Sarikaya, J. T. Staley, and I. A. Aksay, "Biomimetic Materials: An Introduction" in Proc. 50th Ann. Meeting EMSA, edited by G. W. Bailey (San Francisco Press, San Francisco, 1992) 1020-21 (1992) | ||
| (RP48) M. Sarikaya and I. A. Aksay, "Imaging of Hierarchically Structured Materials" in Hierarchically Structured Materials, MRS Symp. Proc., Vol. 255, edited by I. A. Aksay, E. Baer, M. Sarikaya, and D. A. Tirrell, (Materials Research Society, Pittsburgh, Pennsylvania, 1992) 293-307 (1992) |
1991
| (IP19) I. A. Aksay and M. Sarikaya, "Bioinspired Processing of Composite Materials" in Ceramics: Toward the 21st Century, Centennial Int'l Symposium, edited by N. Soga and A. Kato (Ceramic Society of Japan, Tokyo, Japan, 1991) 136-49 (1991) | ||
| (IRP10) C. H. Schilling and I. A. Aksay, "Slip Casting" in Engineered Materials Handbook, Vol. 4, Ceramics and Glasses, edited by C. A. Dostal (ASM International, Materials Park, Ohio, 1991) 153-60 (1991) | ||
| (IRP11) C. H. Schilling, W.-H. Shih, W. Y. Shih, and I. A. Aksay, "Advances in Drained Shaping of Ceramics" Ceramic Powder Science IV, Ceram. Trans., Vol. 22, edited by S. Hirano, G. L. Messing, and H. Hausner (American Ceramic Society, Westerville, Ohio, 1991), 307-20 (1991) | ||
| (IRP9) I. A. Aksay, "Molecular and Colloidal Engineering of Ceramics" in Ceramics Today-Tomorrow's Ceramics: Proc. 7th CIMTEC World Ceramics Congress and Satellite Symposia edited by P. Vincenzini (Elsevier, Amsterdam, 1991) 49-60 (1991) | ||
| (RJ34) I. A. Aksay, "Molecular and Colloidal Engineering of Ceramics" Ceramics International, 17, 267-74 (1991) | ||
| (RJ35) I. A. Aksay and S. M. Wiederhorn, "Symposium for Mullite, Processing, Structure, and Properties" J. Am Ceram. Soc., 74 [10] 2341 (1991) | ||
| (RJ36) I. A. Aksay, D. M. Dabbs, and M. Sarikaya, "Mullite for Structural, Electronic, and Optical Applications" J. Am. Ceram. Soc., 74 [10] 2343-58 (1991) | ||
| (RJ37) J. Liu, W. Y. Shih, R. Kikuchi, and I. A. Aksay, "Clustering of Binary Colloidal Systems: Theory" J. Colloid Interface Sci., 142 [2] 369-77 (1991) | ||
| (RJ38) W. Y. Shih, J. Liu, W.-H. Shih, and I. A. Aksay, "Aggregation of Colloidal Particles with a Finite Interparticle Attraction Energy" J. Stat. Phys., 62 [5/6] 961-84 (1991) | ||
| (RJ39) S. Sundaresan and I. A. Aksay, "Mullitization of Diphasic Aluminosilicate Gels" J. Am. Ceram. Soc., 74 [10] 2338-92 (1991) | ||
| (RJ40) M. Yasrebi, W. Y. Shih, and I. A. Aksay, "Clustering of Binary Colloidal Suspensions: Experiment" J. Colloid Interface Sci., 142 [2] 357-68 (1991) | ||
| (RP36) H. Liu, G. L. Graff, M. Hyde, M. Sarikaya, and I. A. Aksay, "Synthesis of Ultrafine, Multicomponent Particles Using Phospholipid Vesicles" in Materials Synthesis Based on Biological Processes, MRS Symp. Proc., Vol. 218, edited by M. Alper, P. D. Calvert, P. C. Rieke, D. A. Tirrell, and R. Frankel (Materials Research Society, Pittsburgh, Pennsylvania, 1991) 115-21 (1991) | ||
| (RP37) J. Liu, M. Sarikaya, and I. A. Aksay, "Hierarchical Twin Structures in the Nacre of Red Abalone Shell" in Proc. XIIIth Int'l Congress for Electron Microscopy (San Francisco Press, San Francisco, 1991) 848-49 (1991) | ||
| (RP38) N. B. Pellerin, J. T. Staley, T. Ren, G. L. Graff, D. R. Treadwell, and I. A. Aksay, "Acidic Biopolymers as Dispersants for Ceramics Processing" in Materials Synthesis Based on Biological Processes, MRS Symp. Proc., Vol. 218, edited by M. Alper, P. D. Calvert, P. C. Rieke, D. A. Tirrell, and R. Frankel (Materials Research Society, Pittsburgh, Pennsylvania, 1991) 123-28 (1991) | ||
| (RP39) C. H. Schilling, J. J. Lannutti, W.-H. Shih, and I. A. Aksay, "Stress-Density Variations in Al2O3 Sediments: Effects on Polymer Chemistry" in Mechanical Properties of Porous and Cellular Materials, MRS Symp. Proc., Vol. 207, edited by L. J. Gibson, D. J. Green, and K. Sieradzki (Materials Research Society, Pittsburgh, Pennsylvania, 1991) 151-56 (1991) | ||
| (RP40) W.-H. Shih, M. Sarikaya, W. Y. Shih, and I. A. Aksay, "Geometrical Arrangement of Magnetosomes in Magnetotactic Bacteria" in Materials Synthesis Based on Biological Processes, MRS Symp. Proc., Vol. 218, edited by M. Alper, P. D. Calvert, P. C. Rieke, D. A. Tirrell, and R. Frankel (Materials Research Society, Pittsburgh, Pennsylvania, 1991) 109-14 (1991) |
1990
| (CP18) J. Magendie, J. C. Seferis, and I. A. Aksay, "Thermal Stability Comparison of Ceramic and Carbon Reinforced BMI Matrix Composites" in Proceedings 35th Intl. SAMPE Symposium, Vol. 35, No. 2 (SAMPE, California, 1990) 2280-88 (1990) | ||
| (IP18) I. A. Aksay and M. Sarikaya, "Microstructure-Property Relationships in Biocomposites" in Biostructures as Composite Materials, Proceedings of ARO Workshop, edited by E. Baer and I. Ahmed (U.S. Army Research Office, Research Triangle Park, North Carolina, 1990) 171-74 (1990) | ||
| (IRP5) Y. Hirata, I. A. Aksay, R. Kurita, S. Hori, and H. Kaji, "Processing of Mullite with Powders Processed by Chemical Vapor Deposition" in Mullite and Mullite Matrix Composites, Ceram. Trans., Vol. 6, edited by S. Somiya, R. F. Davis, and J. A. Pask (American Ceramic Society, Westerville, Ohio, 1990) 323-38 (1990) | ||
| (IRP6) J. Liu, M. Sarikaya, W. Y. Shih, W.-H. Shih, and I. A. Aksay, "Nanodesigning of Multifunctional Ceramic Composites" in Multifunctional Materials, MRS Symp. Proc., Vol. 175, edited by A. J. Buckley, G. Gallagher-Daggitt, F. E. Karasz, and D. R. Ulrich, (Materials Research Society, Pittsburgh, Pennsylvania, 1990) 3-14 (1990) | ||
| (IRP7) M. Sarikaya, K. E. Gunnison, M. Yasrebi, D. L. Milius, and I. A. Aksay, "Seashells as a Natural Model to Study Laminated Composites" in Proc. American Society Composites, Fifth Technical Conference (Technomic Publ., Lancaster, Pennsylvania, 1990) 176-83 (1990) | ||
| (IRP8) M. Yasrebi, G. H. Kim, K. E. Gunnison, D. L. Milius, M. Sarikaya, and I. A. Aksay, "Biomimetic Processing of Ceramics and Ceramic-Metal Composites" in Better Ceramics through Chemistry IV, MRS Symp. Proc., Vol. 180, edited by B. J. J. Zelinski, C. J. Brinker, D. E. Clark, and D. R. Ulrich (Materials Research Society, Pittsburgh, Pennsylvania, 1990) 625-35 (1990) | ||
| (RJ27) J.-S. Choi, M. Sarikaya, I. A. Aksay, and R. Kikuchi, "Theory of Oxygen Diffusion in the YBa2Cu3O7-x Superconducting Compound" Phys. Rev. B, 42 [7] 4244-54 (1990) | ||
| (RJ28) Y. Hirata, I. A. Aksay, and R. Kikuchi, "Quantitative Analysis of Hierarchical Pores in Powder Compact" J. Ceram. Soc. Japan, 98 [2] 126-35 (1990) | ||
| (RJ29) J. Liu, W. Y. Shih, M. Sarikaya, and I. A. Aksay, "Fractal Colloidal Aggregates with Finite Interparticle Interactions: Energy Dependence of the Fractal Dimension" Phys. Rev. A, 41 [4] 3206-13 (1990) | ||
| (RJ30) W.-H. Shih, W. Y. Shih, S. I. Kim, J. Liu, and I. A. Aksay, "Scaling Behavior of the Elastic Properties of Colloidal Gels" Phys. Rev. A, 42 [8] 4772-79 (1990) | ||
| (RJ31) W. Y. Shih, W.-H. Shih, and I. A. Aksay, "Semidilute Athermal Polymer Solutions Near a Hard Wall" Macromolecules, 23 [13] 3291-96 (1990) | ||
| (RJ32) G. C. Stangle and I. A. Aksay, "Simultaneous Momentum, Heat, and Mass Transfer with Chemical Reaction in a Disordered Porous Medium: Application to Binder Removal from a Ceramic Green Body" Chem. Eng. Sci., 45 [7] 1719-31 (1990) | ||
| (RJ33) S. Sundaresan and I. A. Aksay, "Sintering with Rigid Inclusions: Pair Interactions" J. Am. Ceram. Soc., 73 [1] 54-60 (1990) | ||
| (RP24) J.-S. Choi, J. Javadpour, C. Han, B. L. Thiel, M. Sarikaya, and I. A. Aksay, "Texture Formation in YBa2Cu3O7-x Tapes without a Substrate" in Proc. XIIth Int'l Congress for Electron Microscopy (San Francisco Press, San Francisco, 1990) 44-45 (1990) | ||
| (RP25) J. Javadpour, B. L. Thiel, M. Sarikaya, and I. A. Aksay, "Processing and Characterization of YBa2Cu3O7-x /Ag Composites" in Proc. XIIth Int'l Congress for Electron Microscopy (San Francisco Press, San Francisco, 1990) 46-47 (1990) | ||
| (RP26) K. E. Gunnison, M. Sarikaya, and I. A. Aksay, "Toughening Mechanisms in Abalone Shell" in Proc. XIIth International Congress for Electron Microscopy (San Francisco Press, San Francisco, 1990) 196-97 (1990) | ||
| (RP27) J. Liu, M. Sarikaya, W. Y. Shih, W.-H. Shih, and I. A. Aksay, "TEM Study on the Formation and Charge Stabilization of Nanosized Colloidal Particles" in Proc. XIIth Int'l Congress for Electron Microscopy (San Francisco Press, San Francisco, 1990) 298-99 (1990) | ||
| (RP28) C. B. Martin, R. P. Kurosky, G. D. Maupin, C. Han, J. Javadpour, and I. A. Aksay, "Spray Pyrolysis of Multicomponent Ceramic Powders" in Ceramic Powder Science III, Ceram. Trans., Vol. 12, edited by G. L. Messing, S. Hirano, and H. Hausner (American Ceramic Society, Westerville, Ohio, 1990) 99-106 (1990) | ||
| (RP29) M. Sarikaya, K. E. Gunnison, M. Yasrebi, and I. A. Aksay, "Mechanical Property-Microstructural Relationships in Abalone Shell" n Materials Synthesis Utilizing Biological Processes, MRS Symp. Proc., Vol. 174, edited by P. C. Rieke, P. D. Calvert, and M. Alper (Materials Research Society, Pittsburgh, Pennsylvania, 1990) 109-16 (1990) | ||
| (RP30) M. Sarikaya, I. A. Aksay, and R. Kikuchi, "Mechanism of Twin Formation During the Tetragonal to Orthorhombic Transition in YBa2Cu3O7-x" in High Temperature Superconductors: Fundamental Properties and Novel Materials Processing, MRS Symp. Proc., Vol. 169, edited by J. Narayan, C. W. Chu, L. F. Schneemeyer, and D. K. Christen (Materials Research Society, Pittsburgh, Pennsylvania, 1990) 805-08 (1990) | ||
| (RP31) C. H. Schilling, J. J. Lannutti, and I. A. Aksay, "Particle Network Rearrangement during Pressure Filtration: Analysis by Gamma-Ray Densitometry" in Conference on Nondestructive Evaluation of Modern Ceramics (American Society for Nondestructive Testing, Columbus, Ohio, 1990) 26-30 (1990) | ||
| (RP32) W.-H. Shih, S. I. Kim, W. Y. Shih, C. H. Schilling, and I. A. Aksay, "Consolidation of Colloidal Suspensions" in Better Ceramics through Chemistry IV, MRS Symp. Proc., Vol. 180, edited by B. J. J. Zelinski, C. J. Brinker, D. E. Clark, and D. R. Ulrich (Materials Research Society, Pittsburgh, Pennsylvania, 1990) 167-72 (1990) | ||
| (RP33) W. Y. Shih, W.-H. Shih, and I. A. Aksay, "Mechanical Properties of Colloidal Gels Subject to Particle Rearrangement" in Physical Phenomena in Granular Materials, MRS Symp. Proc., Vol. 195, edited by T. H. Geballe, P. Sheng, and G. D. Cody (Materials Research Society, Pittsburgh, Pennsylvania, 1990) 477-84 (1990) | ||
| (RP34) B. L. Thiel, M. Sarikaya, J. Javadpour, and I. A. Aksay, "Effects of Local Oxygen Ordering on Superconducting Properties of YBa2Cu3O7-x" in Proc. XIIth Int'l Congress for Electron Microscopy (San Francisco Press, San Francisco, 1990) 16-17 (1990) | ||
| (RP35) M. Yasrebi, G. H. Kim, D. L. Milius, M. Sarikaya, and I. A. Aksay, "Processing and Characterization of B4C-Al Laminated Cermets" in Proc. XIIth Int'l Congress for Electron Microscopy (San Francisco Press, San Francisco, 1990) 1022-23 (1990) |
1989
| (CP12) L. A. Chick, C. Viney, and I. A. Aksay, "Liquid Crystal-Like Phase Separation in Systems of Macroscopic Rods" in The Materials Science and Engineering of Rigid Rod Polymers, MRS Symp. Proc, Vol. 134, edited by W. W. Adams, R. K. Eby and D. E. McLermore (Materials Research Society, Pittsburgh, Pennsylvania, 1989) 27-32 (1989) | ||
| (CP13) W.-H. Shih, J. Liu, W. Y. Shih, M. Sarikaya, and I. A. Aksay, "Elastic Properties of Colloidal Gels" in Fractal Aspects of Materials, MRS Extended Abstracts, Vol. EA-20, edited by J. H. Kaufman, J. E. Martin, and P. W. Schmidt (Materials Research Society, Pittsburgh, Pennsylvania, 1989) 243-46 (1989) | ||
| (CP14) W. Y. Shih, W.-H. Shih, and I. A. Aksay, "Density Profiles of Semi-Dilute Polymer Solutions Near a Hard Wall: Monte Carlo Simulation" in Interfaces Between Polymers, Metals, and Ceramics, MRS Symp. Proc., Vol. 153, edited by B. M. DeKoven, R. Rosenberg, and A. J. Gellman (Materials Research Society, Pittsburgh, Pennsylvania, 1989) 169-74 (1989) | ||
| (CP15) W. Y. Shih, W.-H. Shih, and I. A. Aksay, "Monte Carlo Simulation of Adsorption of Di-Block Copolymers" in New Materials Approaches to Tribilogy: Theory and Approaches, MRS Symp. Proc., Vol. 140, edited by L. E. Pope, L. Fehrenbacher, and W. O. Wiener (Materials Research Society, Pittsburgh, Pennsylvania, 1989) 431-36 (1989) | ||
| (CP16) W. Y. Shih, W.-H. Shih, and I. A. Aksay, "Sintering Behavior of an Isolated Pore: Monte Carlo Simulation" in Characterization of the Structure and Chemistry of Defects in Materials, MRS Symp. Proc., Vol. 138, edited by B. C. Larson, M. Rühle, and D. N. Seidman (Materials Research Society, Pittsburgh, Pennsylvania, 1989) 125-30 (1989) | ||
| (CP17) G. C. Stangle, R. B. Prime, D.-J. Rhee, J. C. Seferis, and I. A. Aksay, "The Relative Importance of Thermal Cracking and Reforming During Binder Removal from Ceramic/Polymer Composites" in SPE ANTEC '89 Proc. (1989) 1066-69 (1989) | ||
| (IP17) A. J. Pyzik and I. A. Aksay, "Microdesigning of B4C-Al Cermets" in Processing of Ceramic and Metal Matrix Composites, edited by H. Mostaghaci (Pergamon Press, New York, 1989) 269-80 (1989) | ||
| (IRP3) I. A. Aksay, G. C. Stangle, and M. Sarikaya, "Processing with Nanometer-Sized Colloids" in Ceramic Powder Processing Science III, Proc. 2nd Int'l Conf. on Ceramic Powder Processing Science, edited by H. Hausner, G. L. Messing, and S. Hirano (German Ceramic Society, Koeln, Germany, 1989) 463-70 (1989) | ||
| (IRP4) C. H. Schilling, W. D. Samuels, and I. A. Aksay, "Analysis of Packed-Particle Rearrangement During Colloidal Ceramic Processing: Gamma-Ray Densitometry and a Review of Alternate Methods" in Advanced Characterization Techniques for Ceramics, Ceram. Trans., Vol. 5, edited by W. S. Young, G. L. McVay, and G. E. Pike (American Ceramic Society, Westerville, Ohio, 1989) 181-97 (1989) | ||
| (RJ21) I. A. Aksay, M. Sarikaya, and B. Sonuparlak, "Reply to Comment on Spinel Phase Formation During 980°C Exothermic Reaction in the Kaolinite-to-Mullite Reaction Series" J. Am. Ceram. Soc., 72 [8] 1571 (1989) | ||
| (RJ22) D. C. Halverson, A. J. Pyzik, I. A. Aksay, and W. E. Snowden, "Processing of Boron Carbide-Aluminum Composites" J. Am. Ceram. Soc., 72 [5] 775-80 (1989) | ||
| (RJ23) M. Qian, E. A. Stern, Y. Ma, R. Ingalls, M. Sarikaya, B. Thiel, R. Kurosky, C. Han, L. Hutter, and I. Aksay, "Nickel Impurities in the 90 K Superconductor" Physica B, 158 477-79 (1989) | ||
| (RJ24) M. Qian, E. A. Stern, Y. Ma, R. Ingalls, M. Sarikaya, B. Thiel, R. Kurosky, C. Han, L. Hutter, and I. Aksay, "Nickel Impurities in the Y-Ba-Cu-O 90 K Superconductor" Phys. Rev. B, 39 [13] 9192-99 (1989) | ||
| (RJ25) W. Y. Shih, W.-H. Shih, and I. A. Aksay, "The Stability of Binary Charged Colloidal Crystals" J. Chem. Phys., 90 [8] 4506-12 (1989) | ||
| (RJ26) W. J. Thomson, H. Wang, D. B. Parkman, D. X. Li, M. Strasik, T. S. Luhman, C. Han, and I. A. Aksay, "Reaction Sequencing During Processing of the 123 Superconductor" J. Am. Ceram. Soc., 72 [10] 1977-79 (1989) | ||
| (RP14) L. A. Chick, C. Viney, and I. A. Aksay, "Packing and Structure in Systems Containing Rod-Like Particles" in Processing Science of Advanced Ceramics, MRS Symp. Proc., Vol. 155, edited by I. A. Aksay, G. L. McVay, and D. R. Ulrich (Materials Research Society, Pittsburgh, Pennsylvania, 1989) 331-42 (1989) | ||
| (RP15) G. H. Kim, M. Sarikaya, D. L. Milius, and I. A. Aksay, "Microstructural and Fractographic Characterization of B4C-Al Cermets Tested Under Dynamic and Static Loading" Proc. 47th Ann. Meeting EMSA, edited by G. W. Bailey (San Francisco Press, San Francisco, 1989) 562-63 (1989) | ||
| (RP16) J. J. Lannutti, C. H. Schilling, and I. A. Aksay, "Ceramic Processing Using Inorganic Polymers" in Processing Science of Advanced Ceramics, MRS Symp. Proc., Vol. 155, edited by I. A. Aksay, G. L. McVay, and D. R. Ulrich (Materials Research Society, Pittsburgh, Pennsylvania, 1989) 155-62 (1989) | ||
| (RP17) J. Liu, M. Sarikaya, and I. A. Aksay, "Crystal Structure-Size Relationship in Ultrafine Metallic Particles" in Proc. 47th Ann. Meeting EMSA, edited by G. W. Bailey (San Francisco Press, San Francisco, 1989) 266-67 (1989) | ||
| (RP18) J. Liu, M. Sarikaya, W. Y. Shih, W.-H. Shih, and I. A. Aksay, "Role of Aggregation in the Formation of Colloidal Gold Particles" in MRS Extended Abstracts, Fractal Aspects of Materials, Vol. EA-20, edited by J. H. Kaufman, J. E. Martin, and P. W. Schmidt (Materials Research Society, Pittsburgh, Pennsylvania, 1989) 147-50 (1989) | ||
| (RP19) M. Sarikaya, K. E. Gunnison, and I. A. Aksay, "Seashells as a Natural Model to Study Ceramic-Polymer Composites" in Proc. 47th Ann. Meeting EMSA, edited by G. W. Bailey (San Francisco Press, San Francisco, 1989) 558-59 (1989) | ||
| (RP20) W.-H. Shih, J. Liu, W. Y. Shih, S. I. Kim, M. Sarikaya, and I. A. Aksay, "Mechanical Properties of Colloidal Gels" in Processing Science of Advanced Ceramics, MRS Symp. Proc., Vol. 155, edited by I. A. Aksay, G. L. McVay, and D. R. Ulrich (Materials Research Society, Pittsburgh, Pennsylvania, 1989) 83-92 (1989) | ||
| (RP21) W. Y. Shih, W.-H. Shih, J. Liu, and I. A. Aksay, "Stability of a Binary Colloidal Suspension and Its Effect on Colloidal Processing" in Processing Science of Advanced Ceramics, MRS Symp. Proc., Vol. 155, edited by I. A. Aksay, G. L. McVay, and D. R. Ulrich (Materials Research Society, Pittsburgh, Pennsylvania, 1989) 73-82 (1989) | ||
| (RP22) G. C. Stangle, D.-J. Rhee, and I. A. Aksay, "Removal of Processing Aids from Ceramic/Polymer Composites" in Processing Science of Advanced Ceramics, MRS Symp. Proc., Vol. 155, edited by I. A. Aksay, G. L. McVay, and D. R. Ulrich (Materials Research Society, Pittsburgh, Pennsylvania, 1989) 171-78 (1989) | ||
| (RP23) B. L. Thiel, M. Sarikaya, J. Javadpour, C. Han, and I. A. Aksay, "Microstructure/Property Relations in YBa2Cu3O7-x Powders" in Proc. 47th Ann. Meeting EMSA, edited by G. W. Bailey (San Francisco Press, San Francisco, 1989), 510-11 (1989) |
1988
| (CP10) M. Sarikaya, E. A. Stern, R. Kikuchi, and I. A. Aksay, "Local Structural Variations and Formation of Twins in the Orthorhombic YBa2Cu3O7-x" in MRS Extended Abstracts, High Temperature Superconductors II, Vol. EA-14, edited by D. W. Capone II, W. H. Butler, B. Batlogg, and C. W. Chu (Materials Research Society, Pittsburgh, Pennsylvania, 1988) 277-80 (1988) | ||
| (CP11) W.-H. Shih, W. Y. Shih, and I. A. Aksay, "Electrical Breakdown in 2-Dimensional Cluster-Cluster Aggregated Networks" in Fractal Aspects of Materials: Disordered Systems, MRS Extended Abstracts, Vol. EA-17, edited by D. A. Weitz, A. M. Sander, and B. B Mandelbrot (Materials Research Society, Pittsburgh, Pennsylvania, 1988) 239-41 (1988) | ||
| (CP8) Y. Hirata and I. A. Aksay, "Particle Segregation During Colloidal Filtration" Advances in Materials, Processing and Manufacturing, Proc. of the Advanced Materials Technology Ceramic Workshop, Number 4 (International Committee for Advanced Materials Technology, Nagoya, Japan, 1988) 3-15 (1988) | ||
| (CP9) M. Sarikaya, R. Kikuchi, E. A. Stern, and I. A. Aksay, "Substructural Characterization of YBa2Cu3O7-x" extended abstract, 90th Meeting of the Am. Ceram. Soc., May 1-5, 1988, Cincinnati, Ohio. (1988) | ||
| (IP11) I. A. Aksay, C. Han, R. Kurosky, S. McElhaney, S. Pak, T. K. Yin, T. Yogo, R. M. Laine, and M. Sarikaya, "Synthesis and Colloidal Processing of Superconducting YBa2Cu3O7-x" in 2nd Int'l. SAMPE Electronics Conference, Vol. 2, edited by J. T. Hoggatt, W. Jensen, M. Kushner, and S. McCullough (SAMPE, Covina, California, 1988) 189-98 (1988) | ||
| (IP12) I. A. Aksay, C. Han, R. Kurosky, S. McElhaney, S. Pak, T. K. Yin, T. Yogo, R. M. Laine, and M. Sarikaya, "Processing and Characterization of Superconducting YBa2Cu3O7-x" in Proceedings of Japanese Electronic Materials Manufacturing Association (1988) | ||
| (IP13) I. A. Aksay, W. Y. Shih, and M. Sarikaya, "Colloidal Processing of Ceramics with Ultrafine Particles" in Ultrastructure Processing of Advanced Ceramics, Glasses, and Composites, edited by J. D. MacKenzie and D. R. Ulrich (Wiley, New York, 1988) 393-406 (1988) | ||
| (IP14) I. A. Aksay and G. C. Stangle, "Powder Processing-Science and Technology" in Proc. of the Int'l Symposium on Fine Ceramics, Arita '88, (Organizing Committee: Int'l. Symp. on Fine Ceramics, Arita, Japan, 1988) 39-56 (1988) | ||
| (IP15) W. M. Carty, G. C. Stangle, R. M. Laine, K. A. Youngdahl, M. Sarikaya, and I. A. Aksay, "Fabrication of High Tc Superconducting Fibers from Organometallic Precursors" in 2nd Int'l SAMPE Electronics Conference, Vol. 2, edited by J. T. Hoggatt, W. Jensen, M. Kushner, and S. McCullough (SAMPE, Covina, California, 1988) 170-78 (1988) | ||
| (IP16) M. Sarikaya, R. Kikuchi, E. A. Stern, and I. A. Aksay, "Substructural Variations in YBa2Cu3O7-x" in 2nd Int'l SAMPE Electronics Conference, Vol. 2, edited by J. T. Hoggatt, W. Jensen, M. Kushner, and S. McCullough (SAMPE, Covina, California, 1988) 60-68 (1988) | ||
| (IRP2) B. J. Tarasevich, J. Liu, M. Sarikaya, and I. A. Aksay, "Inorganic Gels with Nanometer-sized Particles" in Better Ceramics Through Chemistry III, MRS Symp. Proc., Vol. 121, edited by C. J. Brinker, D. E. Clark, and D. R. Ulrich (Materials Research Society, Pittsburgh, Pennsylvania, 1988) 225-37 (1988) | ||
| (RJ17) W. M. Carty, G. C. Stangle, R. M. Laine, K. A. Youngdahl, M. Sarikaya, and I. A. Aksay, "Fabrication of High Tc Superconducting Fibers from Organometallic Precursors" SAMPE Quarterly October 3-6 (1988) | ||
| (RJ18) J. Cesarano III, I. A. Aksay, and A. Bleier, "Stability of Aqueous a-Al2O3 Suspensions with Poly(methacrylic acid) Polyelectrolyte" J. Am. Ceram. Soc., 71 [4] 250-55 (1988) | ||
| (RJ19) J. Cesarano III and I. A. Aksay, "Processing of Highly Concentrated Aqueous a-Alumina Suspensions Stabilized with Polyelectrolytes" J. Am. Ceram. Soc., 71 [12] 1062-67 (1988) | ||
| (RJ20) M. Sarikaya, R. Kikuchi, and I. A. Aksay, "Structure and Formation of Twins in the Orthorhombic YBa2Cu3O7-x" Physica C, 152 [2] 161-70 (1988) | ||
| (RP10) C. H. Schilling, G. L. Graff, W. D. Samuels, and I. A. Aksay, "Gamma-Ray Densitometry: Nondestructive Analysis of Density Evolution During Ceramic Powder Processing" in Atomic and Molecular Processing of Electronic and Ceramic Materials: Preparation, Characterization, and Processing, MRS Conf. Proc., edited by I. A. Aksay, G. L. McVay, T. G. Stoebe, and J. F. Wager (Materials Research Society, Pittsburgh, Pennsylvania 239-51 (1988) | ||
| (RP11) B. J. Tarasevich, I. A. Aksay, and M. Sarikaya, "In Situ Precipitation of Silica Within Hydrogels" in Atomic and Molecular Processing of Electronic and Ceramic Materials: Preparation, Characterization, and Processing, MRS Conf. Proc., edited by I. A. Aksay, G. L. McVay, T. G. Stoebe, and J. F. Wager (Materials Research Society, Pittsburgh, Pennsylvania 115-25 (1988) | ||
| (RP12) B. L. Thiel, C. Han, R. Kurosky, L. C. Hutter, I. A. Aksay, and M. Sarikaya, "Characterization of Intergranular Cuprous Oxide in Polycrystalline YBa2Cu3O7-x" in Proc. 46th Ann. Meeting EMSA, edited by G. W. Bailey (San Francisco Press, San Francisco, 1988) 880-81 (1988) | ||
| (RP13) T. K. Yin, I. A. Aksay, and B. E. Eichinger, "Lubricating Polymers for Powder Compaction" in Ceramic Powder Science II, Ceram. Trans., Vol. 1, edited by G. L. Messing, E. R. Fuller, Jr., and H. Hausner (American Ceramic Society, Westerville, Ohio, 1988) 654-62 (1988) | ||
| (RP4) I. A. Aksay, "Principles of Ceramic Shape-Forming with Powder Systems" in Ceramic Powder Science II, Ceram. Trans., Vol. 1, edited by G. L. Messing, E. R. Fuller, Jr., and H. Hausner (American Ceramic Society, Westerville, Ohio, 1988) 663-74 (1988) | ||
| (RP5) L. A. Chick and I. A. Aksay, "The Influence of Alignment and Clustering on the Packing of Whiskers and Fibers" in Atomic and Molecular Processing of Electronic and Ceramic Materials: Preparation, Characterization, and Processing, MRS Conf. Proc., edited by I. A. Aksay, G. L. McVay, T. G. Stoebe, and J. F. Wager (Materials Research Society, Pittsburgh, Pennsylvania 135-45 (1988) | ||
| (RP6) J. Liu, M. Sarikaya, and I. A. Aksay, "Structural Control with Ultrafine Particles" in Proc. 46th Ann. Meeting EMSA, edited by G. W. Bailey (San Francisco Press, San Francisco, 1988) 716-17 (1988) | ||
| (RP7) M. Sarikaya, R. Kikuchi, and I. A. Aksay, "Geometry and Formation of Twins in YBa2Cu3O7-x" in Proc. 46th Ann. Meeting EMSA, edited by G. W. Bailey (San Francisco Press, San Francisco, 1988) 852-53 (1988) | ||
| (RP8) M. Sarikaya, D. L. Milius, and I. A. Aksay, "Characterization of Interfaces in Ceramic-Metal Composites by High Resolution Transmission Electron Microscopy" in Atomic and Molecular Processing of Electronic and Ceramic Materials: Preparation, Characterization, and Processing, MRS Conf. Proc., edited by I. A. Aksay, G. L. McVay, T. G. Stoebe, and J. F. Wager (Materials Research Society, Pittsburgh, Pennsylvania 167-73 (1988) | ||
| (RP9) C. H. Schilling and I. A. Aksay, "Gamma-Ray Attenuation Analysis of Packing Structure During Powder Consolidation" in Ceramic Powder Science II, Ceram. Trans., Vol. 1, edited by G. L. Messing, E. R. Fuller, Jr., and H. Hausner (American Ceramic Society, Westerville, Ohio, 1988) 800-08 (1988) |
1987
| (CP7) Y. Hirata and I. A. Aksay, "Colloidal Consolidation and Sintering Behavior of CVD-Processed Mullite Powders" in Ceramic Microstructures, '86: Role of Interfaces, edited by J. A. Pask and A. G. Evans (Plenum, New York, 1987) 611-22 (1987) | ||
| (IP10) A. J. Pyzik, I. A. Aksay and M. Sarikaya, "Microdesigning of Ceramic-Metal Composites" in Ceramic Microstructures '86: Role of Interfaces, edited by J. A. Pask and A. G. Evans (Plenum, New York, 1987) 45-54 (1987) | ||
| (RJ12) M. Sarikaya, B. L. Thiel, I. A. Aksay, W. J. Weber, and W. S. Frydrych, "Microstructural Characterization of YBa2Cu3O7-x" J. Mater. Res., 2 [6] 736-42 (1987) | ||
| (RJ13) W. Y. Shih, I. A. Aksay, and R. Kikuchi, "Phase Diagrams of Charged Colloidal Particles" J. Chem. Phys., 86 [9] 5127-32 (1987) | ||
| (RJ14) W. Y. Shih, I. A. Aksay, and R. Kikuchi, "Reversible-Growth Model: Cluster-Cluster Aggregation with Finite Binding Energies" Phys. Rev. A, 36 [10] 5015-19 (1987) | ||
| (RJ15) B. Sonuparlak, M. Sarikaya, and I. A. Aksay, "Spinel Phase Formation at the 980°C Exothermic Reaction in the Kaolinite to Mullite Reaction Series" J. Am. Ceram. Soc., 70 [11] 837-42 (1987) | ||
| (RJ16) W. J. Weber, L. R. Pederson, J. M. Prince, K. C. Davis, G. J. Exarhos, G. D. Maupin, J. T. Prater, W. S. Frydrych, I. A. Aksay, B. L. Thiel, and M. Sarikaya "Synthesis and Characterization of YBa2Cu3O7-x Superconductors" Adv. Ceram. Mater., 2 [3B] 471-79 (1987) | ||
| (RP2) J. Cesarano III and I. A. Aksay, "Interactions Between Polyelectrolytes and Oxides in Aqueous Suspensions" in Surface and Colloid Science in Computer Technology, edited by K. L. Mittal (Plenum, New York, 1987) 73-86 (1987) | ||
| (RP3) M. Sarikaya, T. Laoui, D. L. Milius, and I. A. Aksay, "Identification of a New Phase in the Al-C-B Ternary by High Resolution Transmission Microscopy" in Proc. 45th Ann. Meeting EMSA, edited by G. W. Bailey (San Francisco Press, San Francisco, 1987) 168-69 (1987) |
1986
| (IP8) I. A. Aksay, "Fundamentals of Powder Consolidation in Colloidal Systems" in Ceramics Today and Tomorrow: Processing, Properties, and Applications, edited by S. Naka, N. Soga, and S. Kume (The Ceramic Society of Japan, Tokyo, Japan, 1986) 71-86 (1986) | ||
| (IP9) I. A. Aksay and R. Kikuchi, "Structures of Colloidal Solids" in Science of Ceramic Chemical Processing, edited by L. L. Hench and D. R. Ulrich (Wiley, New York, 1986) 513-21 (1986) | ||
| (IRP1) N. Shinohara, D. M. Dabbs, and I. A. Aksay, "Infrared Transparent Mullite Through Densification of Monolithic Gels at 1250°C" Infrared and Optical Transmitting Materials,SPIE Proc 683 19-24 (1986) | ||
| (RP1) M. Sarikaya and I. A. Aksay, "High Resolution TEM Studies of Mullite Formation in Metakaolinite" in Proc. 44th Ann. Meeting EMSA, edited by G. W. Bailey (San Francisco Press, San Francisco, 1986), 466-67 (1986) |
1985
| (CP5) C. Han, I. A. Aksay, and O. J. Whittemore, "Characterization of Microstructural Evolution by Mercury Porosimetry" in Advances in Materials Characterization, II, edited by R. L. Snyder, R. A. Condrate, Sr., and P. F. Johnson (Plenum, New York, 1985) 339-47 (1985) | ||
| (CP6) M. Sarikaya, I. A. Aksay, and G. Thomas, "High Resolution Electron Microscopic Characterization of Interfaces in Ceramics" in Advances in Materials Characterization, II, edited by R. L. Snyder, R. A. Condrate, Sr., and P. F. Johnson (Plenum, New York, 1985) 167-78 (1985) | ||
| (RJ11) D. C. Halverson, A. J. Pyzik, and I. A. Aksay, "Processing and Microstructural Characterization of B4C-Al Cermets" Ceram. Eng. Sci. Proc., 6 [7/8] 736-44 (1985) |
1984
| (IP5) I. A. Aksay and C. H. Schilling, "Colloidal Filtration Route to Uniform Microstructures" Chap. 34 in Ultrastructure Processing of Ceramics, Glasses, and Composites, edited by L. L. Hench and D. R. Ulrich (Wiley, New York, 1984) 439-47 (1984) | ||
| (IP6) I. A. Aksay and C. H. Schilling, "The Mechanics of Colloidal Filtration" in Forming of Ceramics, Advances in Ceramics, Vol. 9, edited by J. A. Mangels and G. L. Messing (American Ceramic Society, Columbus, Ohio, 1984) 85-93 (1984) | ||
| (IP7) I. A. Aksay, "Microstructure Control through Colloidal Consolidation" in Forming of Ceramics, Advances in Ceramics, Vol. 9, edited by J. A. Mangels and G. L. Messing (American Ceramic Society, Columbus, Ohio, 1984) 94-104 (1984) |
1983
| (RJ10) I. A. Aksay, F. F. Lange, and B. I. Davis, "Uniformity of Al2O3-ZrO2 Composites by Colloidal Filtration" J. Am. Ceram. Soc., 66 [10] C190-2 (1983) | ||
| (RJ9) F. F. Lange, B. I. Davis, and I. A. Aksay, "Processing-Related Fracture Origins: III, Differential Sintering of ZrO2 Agglomerates in Al2O3/ZrO2 Composite" J. Am. Ceram. Soc., 66 [6] 407-08 (1983) |
1981
| (CP3) A. Davutoglu and I. A. Aksay, "The Work of Adhesion Measurements by a Periodic Cracking Technique" in Surfaces and Interfaces in Ceramic Metal Systems, edited by J. A. Pask and A. G. Evans (Plenum, New York, 1981) 641-49 (1981) | ||
| (CP4) W. E. Snowden and I. A. Aksay, "Measurement of Thick Film Adhesion by an Impact Separation Technique" in Surfaces and Interfaces in Ceramics and Ceramic-Metal Systems, edited by J. A. Pask and A. G. Evans (Plenum, New York, 1981) 651-60 (1981) |
1980
| (CP2) M. A. Sogut and I. A. Aksay, "Kinetics of Aluminum Oxide Slip Casting" in Proc. of Production and Application of Refractories in Metallurgy Sci. and Tech. Unions in Bulgaria (Varna, Bulgaria, 1980). (1980) |
1979
| (IP3) M. A. Sogut and I. A. Aksay, "Seramik Döküm Kinetigi (Slip Casting Kinetics)" in Proc. of the Third National Symposium on Metallurgy (Met. Müh. Od., Ankara, Turkey, 1979) 961-77 (1979) | ||
| (IP4) B. Sonuparlak and I. A. Aksay, "Elektron Mikroprob Aygiti ve Seramik Malzemelere Uygulamasi (Application of Electron Beam Microprobe in Ceramics Research)" in Proc. of the Third National Symposium on Metallurgy (Met. Müh. Od., Ankara, Turkey, 1979) 995-1007 (1979) | ||
| (RJ8) I. A. Aksay, J. A. Pask, and R. F. Davis, "Densities of SiO2-Al2O3 Melts" J. Am. Ceram. Soc., 62 [7-8] 332-36 (1979) |
1977
| (IP2) E. E. Alp and I. A. Aksay, "Seramik Mühendisligi, Egitimi ve Türkiye'deki Durum (Ceramic Engineering, Its Education and Status in Turkey)" in Proc. 2. Metalurji Bilimsel ve Teknik Kongresi (Met. Müh. Od., Ankara, Turkey, 1977) 449-68 (1977) | ||
| (RJ7) N. Bilir and I. A. Aksay, "Elektron Mikroprobu ve Uygulamada Mikroanaliz (Electron Beam Microprobe and Microanalysis Applications)" O.D.T.Ü. Uygulamali Arastirmalar Dergisi, 1 [3] 102-10 (1977). (1977) |
1976
| (RJ6) K. S. Liang, W. R. Salanek, and I. A. Aksay, "X-Ray Photoemission Studies of Thin Gold Films" Solid State Commun., 19 [4] 329-34 (1976) |
1975
| (IP1) J. A. Pask and I. A. Aksay, "Determination of Phase Diagrams Using Diffusion Techniques" in Mass Transport Phenomena in Ceramics, Materials Science Research, Vol. 9, edited by A. Heuer and A. R. Cooper (Plenum, New York, 1975), 433-44 (1975) | ||
| (RJ5) I. A. Aksay and J. A. Pask, "Stable and Metastable Equilibria in the System SiO2-Al2O3" J. Am. Ceram. Soc., 58 [11-12] 507-12 (1975) |
1974
| (CP1) I. A. Aksay, C. E. Hoge, and J. A. Pask, "Phase Distribution in Solid-Liquid-Vapor Systems" in Interfaces of Glass Ceramics, Materials Science Research, Vol. 7, edited by V. D. Frechette, W. C. LaCourse, and V. L. Burdick (Plenum Press, New York, 1974) 199-221 (1974) | ||
| (RJ3) I. A. Aksay and J. A. Pask, "The Silica-Alumina System: Stable and Metastable Equilibria at 1.0 Atmosphere" Science, 183 [4120] 69-71 (1974) | ||
| (RJ4) I. A. Aksay, C. E. Hoge, and J. A. Pask, "Wetting Under Chemical Equilibrium and Nonequilibrium Conditions" J. Phys. Chem., 78 [12] 1178-83 (1974) |
1973
| (RJ2) A. P. Raju, I. A. Aksay, and J. A. Pask, "Permeation of Silicates in Magnesia and Forsterite Compacts" Am. Ceram. Soc. Bull., 52 [2] 166-69 (1973) |
1972
| (RJ1) R. F. Davis, I. A. Aksay, and J. A. Pask, "Decomposition of Mullite" J. Am. Ceram. Soc., 55 [2] 98-101 (1972) |
B. Books and Special Journal Issues Edited
| (B10) "Materials Research to Meet 21st Century Defense Needs, National Materials Advisory Board, National Research Council, National Academy Press, Wash., D.C.," (2003) |
|
| (B9) "Opportunities in Biotechnology for Future Army Applications, Board on Army Science and Technology, National Research Council, National Academy Press, Wash., D.C.," (2001) |
|
| (B7) editors W. C. Simmons, I. A. Aksay, and D. R. Huston "Smart Structures and Materials 1997: Smart Materials Technologies, SPIE Proceedings, Vol. 3040, (SPIE - The International Society for Optical Engineering, Bellingham, Washington)" (1997) |
| (B6) editors M. Sarikaya and I. A. Aksay, "Biomimetics: Design and Processing of Materials, AIP Press, Woodbury, NY," (1995) |
| (B5) "Hierarchical Structures in Biology as a Guide for New Materials Technology, National Materials Advisory Board, National Research Council, NMAB-464, National Academy Press, Wash., D.C.," (1994) |
|
| (B4) edited by I. A. Aksay, E. Baer, M. Sarikaya, and D. A. Tirrell "Hierarchically Structured Materials, Materials Research Society Symposium Proceedings, Vol. 255, (Materials Research Society, Pittsburgh, Pennsylvania)" (1992) |
| (B3) edited byI. A. Aksay and S. M. Wiederhorn "Mullite, Processing, Structure, and Properties" J. Am Ceram. Soc, 74 [10] (1991) |
| (B2) edited by I. A. Aksay, G. L. McVay, and D. R. Ulrich "Processing Science of Advanced Ceramics, Materials Research Society Symposium Proceedings, Vol. 155, (Materials Research Society, Pittsburgh, Pennsylvania)" (1989) |
| (B1) edited by I. A. Aksay, G. L. McVay, T. G. Stoebe, and J. F. Wager "Atomic and Molecular Processing of Electronic and Ceramic Materials: Preparation, Characterization, and Processing, (Materials Research Society, Pittsburgh, Pennsylvania)" (1988) |
| (B8) edited by I. A. Aksay and S. Weiner "Biomaterials, Current Opinion in Solid State and Materials" Science 3 [3] 219-52 (1900) |
C. Patents
| (PT19) I.A. Aksay, H.-L. Ker, "Plastically Deformable Aqueous Ceramic Slurries and Methods of Making Such Compositions U.S. Patent #6,494,945. (Owned by Princeton University)" (2002) |
|
| (PT13) M. Trau, I.A. Aksay, D.A. Saville, "Apparatus for Electrohydrodynamically Assembling Patterned Colloidal Structures U.S. Patent #6,033,547" (2000) |
|
| (PT10) M. Trau, I.A. Aksay, D.A. Saville, "Method and Apparatus for Electrohydrodynamically Assembling Colloidal Structures U.S. Patent #5,855,753" (1999) |
|
| (PT9) M. Yasrebi, H. Nakagawa, and I.A. Aksay, "Method for Stabilizing Ceramic Suspensions U.S. Patent #5,624,604" (1997) |
|
| (PT8) J.T. Staley, I.A. Aksay, G.L. Graff, N.B. Pellerin, and T. Rao, "Process for Suspension of Ceramic or Metal Particles Using Biologically Produced Polymers U.S. Patent #5,503,771" (1996) |
|
| (PT7) I.A. Aksay, M. Yasrebi, D.L. Milius, G.-H. Kim, and M. Sarikaya, "Laminated B4C/Al Composites through Melt Infiltration U.S. Patent #5,308,422," (1994) |
|
| (PT6) M. Hama, D.M. Dabbs, and I.A. Aksay, "Low Temperature Sintering of Ceramic Materials U.S. Patent #5,135,691" (1992) |
|
| (PT3) B. Sonuparlak and I.A. Aksay, "Process for the Production of Porous Ceramics Using Decomposable Polymeric Microspheres and the Resultant Product U.S. Patent #4,777,153," (1988) |
|
| (PT2) A.J. Pyzik and I.A. Aksay, "Multipurpose Boron Carbide-Aluminum Composite and Its Manufacture via the Control of the Microstructure U.S. Patent #4,702,770," (1987) |
|
D. Patent Applications
| (PA1) C.G. Rusin, W.D. Ristenpart, D.A. Saville, I.A. Aksay "A Colloidal Pen for Producing Colloidal Crystals" U.S. Provisional Patent Application Serial No. 60/316,813 (08/2001) Docket No. 02-1843-1. (2001) |
E. Invention Disclosures
| (ID1) I.A. Aksay, C.M. Wahl, D.M. Dabbs, I. Yilgor "L3 Silica/Polyurethane Thermally Insulating Nanocomposites" Docket No. 04-2059-1 (2003). (2003) |
![]()
![]()
All of the publications contained in this website are protected under United States and international copyright laws and may not be reproduced or distributed in any form without the expressed written permission of its respective publisher.
You may use the material on this website for your own private use only. You may print articles for your personal use. However, you may not copy printed articles without our written permission. If you would like to share articles with friends or associates, send them the direct URL link to the article.
You may not charge money for our material or use it for commercial purposes or monetary gain.
![]()
![]()
![]()
![]()
© 2005 Princeton University, Department of Chemical Engineering,
Ceramic Materials Laboratory. All Rights Reserved.

